need some help. washed bike and now wont start it has had a few days to dry out but still no spark. this happened once before when i bought it a few months ago but did start after washing and then i think like next day it started i shut off after running and tried to start again after sitting for an hour and would'nt start for a couple weeks. i know crazy. anyway i tested the pickup coil and it ohms out at 99 i checked resistance on coils and they ohm out in spec now im trying to test tci. on my bike the wire colors are different than what is in the manual so here is what i have left plug on box from left to right is top orange bottom blue &yellow middle black and right top red&black bottom yellow&black. right plug on box same order left top black&red bottom black middle top grey bottom white right top orange bottom yellow. manual says i should have a red&white wire going in box that should be 12 volt supply i dont have a red&white which wire would be my 12 volt supply? here is a couple photos of plugs