Rider peg relocation question

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sharky

Well-Known Member
Joined
Jun 19, 2012
Messages
471
Reaction score
0
Location
Brisbane, AUSTRALIA
Ok...so I tried rear sets but no go with my super low seat height.
So I mocked up moving the stock units forwards 2-3". This mod woyld also maintain tje 'stock' appearance that should help keep the cops of my ass....
Trouble is I have the engine out..
So, my question is...ignoring the brake lever/gear lingages etc is there room to do this ?
I've studied many pics and it looks like a plan. ..can anyone confirm this ?
Cheers
 
You can look at the Yamaha Ventures for what it will look like in relation to the engine cases. They had mid controls on them (and you can even use the venture shifter stuff to make your fabbing a little easier too).
 
Thanks folks...looks like it will work out nicely.
Miles, just the pics I needed.
Sean, thanks...I'll research venture parts.
 
Ok...so I tried rear sets but no go with my super low seat height.
So I mocked up moving the stock units forwards 2-3". This mod woyld also maintain tje 'stock' appearance that should help keep the cops of my ass....
Trouble is I have the engine out..
So, my question is...ignoring the brake lever/gear lingages etc is there room to do this ?
I've studied many pics and it looks like a plan. ..can anyone confirm this ?
Cheers
Would you still have the rearsets?
 
Back
Top