Stator resistance

[vince95]

The manual states stator resistance between each leg is .42 ohms +/- 15% which would give .48 as the high end at 20deg. celsius(68). My stator is measuring .7 ohms cold and .8 ohms when hot(measured at 75 deg.) Does this mean the stator is bad? What symptoms occur when the resistance gets too high? My charging voltage is 13.5v. Charging system seems to operate ok except for my popping out of cylinder #3. :ummm:

 

[maleko89]

That's not bad. Main thing is that all 3 legs read the same. 13.5 volts at idle is perfect.

 

[vince95]

Thanks! Thats what I needed to make sure.