relay

I don't think my relay is stock. I am wondering about the 2 wires going to the plug one is blue/white the other on pictures I have found looks to be red/white. The wiring diagram shows only the blue/white wire where does the other one go. The relay I have has 2 wires one goes to battery ground...

So I tested my side stand relay. Found it to be bad. Here is the weird thing. Bike will run, when put in gear, side stand down, WITH THE RELAY REMOVED. No need to jumper the wire to the ignitor.:ummm::ummm::ummm: Any ideas on why. I dont have my clutch switch wired cuz I have the FJR...

All right for all you guys out there who's bike will only run when the fuel switch is in the reserve position..... Check Your Light Bulb!!!! :bang head::bang head: When you first start the bike the light should come on. Mine didnt. :bang head::bang head: I never really paid attention to it...

I'm trying to get the bike back together this weekend and running but the starter butting won't start it! The relay clicks and everything but doesnt engage the starter. I took the connections off, cleaned then, and put them back on and still no go but if I jump between the 2 connectors the...

Where is the stock flasher relay located? Does anyone know if this will plug and play or need hard wired? http://www.customled.com/products/flasher_relay/flasher_relay.htm -Paul

I need help with my 97max. I need to know exactly where is the sidestand relay, what it looks like and how to check it to see if it's good. My manuel has very fuzzy pictures and the colors of the wires don't match up with anything on my max. If anyone has any info please let me know. Thanks, Shawn

What the hell. This bike breaks more than the old Harley ever did. I just did a valve adjust. Today I took the bike to work, no issues going out. Coming home, I lost everything on the dummy lights panel, tach and temp gauge, both turn signals, horn, and my brake light. Fun ride home. I've lost...

Anyone got a fuel pump relay they are willing to sell??? Mine shit the bed Cheers

Having re-wired my handlebars-mounted fan switch via a relay to actually manually disable the cooling fan, I rode my usual 90-miles I-4 commute, at my usually cruising speeds of 75-95mph. I decided to leave the fan switched off, since I figured that at highway speed, there should be enough...

Took a ride today and she wouldn't start-had to jump start her to get her home. All I got when I turned the key was a clicking, seems to be coming from the starter relay. Is that what they sound like when they're gone?

Anyone have on of these go bad? I put on some new LED turn signals. Completed installation of rear signals and tested..worked fine. Continued to front two completed and checked ..nada. now nothing works. Following Haynes I narrowed it down to the Signal relay module. Anyone have a good spare one...

Just messing around wiring up the lights and led's on Max tonight, and thought I would say this. I have some ultra-bright led front signals in combination with the Artfibras tail section lighting (low watt 194 style). The right would blink fast, and left would go crazy buzzing in epi seizure...

Hello again, After having most starting and ignition related sockets apart (for getting the pins checked and treated with corrosion prevent spray) there occurred two very interesting problems. The problems were not so special, but the solution (same for both problems!) sounds almost like...

Ok, when I try to start with the button, the starter relay clicks and thats it, nothing else. I'm not very mechanical minded, so my thought process doesn't go beyond taking things out and putting this back together! No joy with a jump start -from the car just the same (starter relay clicks)...

I have a 2000 vmax and when I turn on the blinkers it doesn't turn off unless I push in the button with my thumb?? Is this "normal"?? I thought it would turn off by it self after time or distance.Thanks for any help!!

:bang head: I am looking or a fuel pump relay. 86 Vmax [email protected]

Hey Guys... Got some super led turn signals on the way, and I don't want to run the load equalizers. Instead I want a true solution like the ELFR-1 http://customled.com/PRODUCTS/FLASHER_RELAY/flasher_relay.htm , so in the future additions can be added with ease. Does anyone here know if I...