Brake resufacing

[longburn]

Anyone delt with this guy http://www.truedisk.net/ I have 14000 on my bike but have pulse on both front and back. Mostley back. Will this help or am I looking at new for both??

 

[one2dmax]

Clean the buttons on the front and that should fix the problem there. The rear would be junk if it's indeed warped (which I would highly doubt).

Sean

 

[longburn]

Your probably right about the buttons it's very slight. Any ideas on the back if you doubt it's warped?

Thanks

 

[one2dmax]

disassemble and clean the caliper/pistons to see if that helps.

 

[PATMAX]

And stock rotors from someone here on this Forum could probably be had for cheap cheap cheap. It's worth a try. I 'be never seen a warped rear. I suppose if it was in accident, it could be knocked out of true.

 

[one2dmax]

i have plenty of used stock. I think a used ebc and of course a variety of new ebc, galfer, and other rotors.

 

[longburn]

No accident. I think I'll pull them apart take a look clean ect. Just thought it might be a known problem. I may take you up on a good used rotor in the spring if things don't work out. Provided you still have them.

Thanks again

 

[one2dmax]

I've got a huge stack and would be surprised if i ran out. and surprised if yours was indeed the source of the problems too.