Starter motor

[davidon]

I have'nt taken this off in a few years but looks like it needs internal cleaning. I've removed the rad and drain tube assembly for access for removal. Is there anything else that needs to move or is there enough room to wiggle it out at this point? Looks like the cross bar is very close to it on top. Can't remember if this needs to go as well. Thanks.

 

[wildweasel_pt]

Check service manual

 

[Langley182]

I pulled the motor out still attached to the cross bar. There are 4 bolts (If I remember correctly) attaching the cross bar on the sides.