Sharky's Max project....

Sharky · Jan 26, 2013

All that remains of the stock bike is literally the frame,motor and swing arm.......that's it...everything else is gone.....fake scoops...air box cover...the lot..
Its now sitting on 04 r1 forks in 70mm slab yokes with a billet 17x3.5" wheel.
There's a matching 17x6" on it's way for the rear.
The air box cover started life as an EX650 tank...slightly modified lol.
There will be a new tank that extends into the seat unit....increasing capacity from 15 to 20ish litres.....plus a new subframe......the list goes on......gonna be fun to do....

dtoebaert-5311 · Jan 26, 2013

that Kwak cover does look mean on the Max! just don`t paint it green, OK :rofl_200:

wildweasel_pt · Jan 26, 2013

Looking good...

mabdcmb@yahoo.com · Jan 26, 2013

......

Sharky · Jan 27, 2013

The yokes are 70mm thick so hopefully they've added enough length....I want the slammed low look on this bike..
I'll be checking the max compression/clearance to the rad soon...I plan to use a custom radiator anyway.
You can modify the internals to allow more of the chrome slider out of the upper leg. I have a link for it somewhere from another forum. I'll track it down and add it here.

Diablotin · Jan 27, 2013

Super cool tank

Sent from my GT-I9100 using Tapatalk 2

wildweasel_pt · Jan 27, 2013

Looking good...

wildweasel_pt · Jan 27, 2013

Looking good...

mabdcmb@yahoo.com · Jan 27, 2013

Sharky · Jan 27, 2013

On the stock yoke the legs sit flush with the top of the yoke...on mine the top of the legs are 60mm below that point.

Anyway...not gonna argue about it...if I need to extended them I will but not until I have looked at all options.

wildweasel_pt · Jan 27, 2013

Sure mate. Im just saying based on my experience with that exact thing. Im not pointing fingers just sharing my thoughts. You can do whatever you want with them... Sorry for the thread hi-jack...

Sharky · Jan 28, 2013

No worries mate...all good...good to get feedback from someone that's done the same mod

AMechEng · Feb 12, 2013

Lets get some updates! Looks good so far.

FootNote · Feb 12, 2013

I like it!

Sharky · Feb 18, 2013

Hey Mr Wildweasel......just seen you've removed your posts about the front end....how come ?
We were only discussing it.......
I am going to extend my forks and was hoping to ask you about it.
Anyway...here's a pic.......

arjan · Feb 18, 2013

I really appreciate these kind of Vmax-projects !

Intensive BIG time customizing, I'll be following this threat :clapping:

Sharky · May 14, 2013

Following the creation of the loooow seat height I decided I needed some decent bars.Keen to make sure it didn't look to 'harley' the girlfriend and I, over a few bourbons, came up with this idea....

Sharky · May 14, 2013

So next up was attacking a large lump of billet with my trusty drop saw....

Diablotin · May 15, 2013

Nice bars...

Sent from my GT-I9100 using Tapatalk 2

wildweasel_pt · May 15, 2013

Isn't that a wood circle saw? I might be wrong but that looks like a bench saw for wood not for a 2 inch thick of billet...

Sharky's Max project....

Help Support VMAX Forum:

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Active Member

Well-Known Member

Attachments

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!