led

Dont know if this has been covered , if it has , one of the moderators can delete this . I picked up a $7. LED truck side light at CAP ( Consumer Auto Parts here in NE ) Same size as the reflector that's in the grab rail and the holes even line up . You need to drill a small hole for the...

I have tried different halogen type and I'm pretty disappointed with them during daylight since it's always pretty sunny here and they cannot be seen. The last I tried are the aluminium rectangular type with clear lens sold by sean or python. Since I'm converting my rear section and adding an...

Alright, Big shout out to jacoviii for bringing my attention to the possibilities of this light! Made for an 03-06 CBR 600rr/ 04-07 CBR 100rr, its actually a perfect fit for the max and only cost about $65 shipped. I received it in 4 days and it looked like a well made unit. The included...

..I have a 99 that someone installed a combo brake/taillight = where the rear reflector goes..and the removed the old taillight/plate holder... I have an 86 that I want to do the same to..Anyone know where to find a combo light that fits in reflector spot? I want a flat one...Not rounded...

just got a new tail light it fit 99.9% pics to come http://www.motodynamic.com/product_info.php?cPath=1_2&products_id=185 use these instruction the should help http://www.motodynamic.com/installation/D-MST-B-BST.pdf

I have a Python shift light. I wash my bike and I think I must have got the shift light wet. At first it would light up randomly then the next day (hoping it would dry out) I checked it and now I get nothing. My question is has anyone had this issue before? Can I save it? Or should I plan on...

i just put in clear lens and change the old bulbs to yellow 12led 1157. so now i when i turn on a blinker all 4 lights blink fast. what do i need to do to fix this? Thanks, Sid

I decided to swap all my speedo, gauge and indicator lights to LED. All is good except the the yellow turn signal led, it only blinks when the turn signal switch is to the left. If I turn the LED around it only blinks to the right. I do have all blinkers changed to LED, with the flasher for...

Ok, I just upgraded to dual intensity LED blinkers, but I dont like them so changing them back to single and modifying them to dual the correct way. My questions are as follows: I have attached a diagram to make dual parking/directional signals from a single intensity LED. Using the 1N5400...

Has anyone used LED's to light up and show off their bike? Besides doing the LED mod to the instruments and speedo, I'd like to do more of the bike in Red. I'd like to hear from others that have done this, what they used, how, and of course see pictures of it. I think I am going to get some...

First off, I want to say thanks to Jamie for posting this thread. http://www.vmaxforum.net/showthread.php?t=3135&highlight=grab&page=2 I recently put on some LED signals. As anticipated, I had some issues with the flash rate or just getting the signals to flash at all. I did a few different...

I've searched the posts but have yet to find a definite answer to how to hookup my LED turn signals. When I connect the rear two, they just blink fast (I expect that because it thinks the bulbs are gone) however when I connect the front two, all 4 led turn signals come on either way but at a...

Finally finished the led lighting project. The right side scoop has the fins already cut out from the factory, the left side I had to cut out with an exacto knife. I wired everything in to the headlight fuse, and mounted a toggle switch above the left scoop. I bought the two led lights in the...

Has anyone tried replacing the stock tail light bulbs with Spinner LEDs? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330329114710&ih=014&category=35580&_trksid=p3911.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26ps%3D5 Of course, you would also need to invest in some...

So I read up on Cop Runner?s light mod and decided it was a great idea. The install was easy, but somewhat more complicated than I anticipated, so I thought I?d add a step-by-step with pics just in case anyone has had this on the backburner. It takes less than half an hour and is totally worth...

Anyone frustrated with led signal lights, forced to buy special led relay and probably still have TURN indicator lights not working... I have an 97 v-max at my garage with some things to do and owner want to instal set of led signal lights. I've instaled them and OEM signal relay works with all...

I was going to purchase an LED tail light from Motorcycle mods. Would I need to reduce the voltage to this the same as LED turn signals? What type of resistor ,(ohm) would I have to put in if I do?

Is there any chance that i cant use the ? http://www.d2moto.com/Items/lts103-clear-uni?&caSKU=lts103-clear-uni&caTitle=Universal%20Clear%20LED%20Turn%20Signals#null and to you know any better looking fore similar price ? Thanks.

I just installed these today. No ugly brackets. No wires to hide. Clean and simple. Signals are Lockhart Phillips Razor LED's Part#122-8250 Pigtail Conectors are Lockhart Phillips Part#122-9655 and plug into the stock signal connectors. Hole is drilled one inch from headlight...

sometimes you see one you just have to share... http://www.youtube.com/watch?hl=en-GB&v=D2FX9rviEhw&gl=GB