project

I bought a 1997 Chevy Camaro Z28 back in early april. The car had one original owner and only had 30K on the odo! The lady kept the car in a heated garage with carpet and the car has never seen rain or snow! She even had the original window sticker! I have never seen anything close to this...

Swingarm project is done, + 80mm from stock and if you look carefully it is somewhat different from stock. Really happy with the outcome as everything worked out well. I've dreamed up a few variations for the next ones.

I'm about to take off my UFO exhaust and I was wondering, 1. what you guys suggestto use to clean them up once they are off 2. Is there a trick to geting out the old exhaust gaskets? I forgot to tell ya that they are black ceramic exhaust. Thanks Ron

Hi guys, I screwed up when I tried to put my seat on I couldn't figure out how it was suppose to go on, the holes were not matching up, so I took the hinge apart and now I can't figure out how the spring goes back on the hinge. Does anyone have a picture of the bottom of the seat that is...

Well, my Max has been in need of a little work for a while now. And then last week I hit a deer, which has added to the list. So, I've decided to just quit procrastinating and just start fixin' her up. After a lot of thought I've decided the best course is just a complete tear down to the frame...

Decide to go with different Reservoir and Mounting setups on the front and rear of my 09 R1. The front setup is one that is designed by Rizoma to work in the fashion that it is used. The rear however is my use of their front mout bracket to work with my SATO rearsets and tuck everything in...

ok u guys saw my exhaust fabrication in one of the threads i posted. so i guess i will document the rest of my build here. lol. it aint nothing like the gruelling techicals Turbovmax has did with his EFI mods.. i'm not at that level yet. haha but what i am doing to my max now is a makeover in...

Finally here it is. This started as a 1994 Yamaha Vmax that was a one owner but given to his 20 year old son to ride. He drive it 2K miles let it set for 12 years. There is a bunch of angles of the bike with 2 shots showing you where she started from at the end. This was about 8 weeks due...

Well I have started my carb removal today and when I unscrewed the carb cover on the right side I saw this Wonder if that is why my bike was running so bad. ??? :bang head: I also noticed this when I removed the airbox, where should these be attached to?? anyways on with my project...

Well, here is what my buddy, and my brother in law came up with last Sunday.... it is a blast! Probably tops out around 15mph, but it is pretty responsive for a 40cc motor! http://www.youtube.com/watch?v=tIAB3Ef6DfQ

You have to check this out. My first thought was how do I swap out the engine. I'd love to take one of these for spin with some serious power behind it. http://www.oneshift.com/forum/topic_details.php?fid=1&tid=7021&page_id=1&done=list_topics.php%3Ffid%3D1%26page_id%3D1

I know there are some fans of the FZX 750 Fazer who live in this forum and I need your help. I have the opportunity to buy a well priced low kms Fazer for my next project. I want to build the bike pictured and I'd like more information about it. I have seen a similar project bike on the net...

Not a VMax but it is from Ma' Yamaha. Well I had chalked it up this year to not getting a bike due to some other obligations. Thanks to a certain friend that wouldn't let that go, I got into a bike on the cheap in the form of an 81 Yamaha XJ650. I got it home, put it on the battery charger...

This guy has to be the coolest guy on the planet. Pizza, Beer and Bikes! dosen't get any better than that! http://www.traditionaloven.com/ Started early last year gathering up all the materials, already have the firebrick and lots of used brick and a cement mixer. And a best of all a...

I'm working at making up a set of manifold's to adapt sport bike throttle bodies. This a big project and we'll need lots of help from everyone to make it happen. The goal is to come up with an affordable EFI setup... hopefully a complete engine management system for the MAX. Any fiberglass guys...

Well, some of you know that I am in the process of building a drag bike (or trying to anyway) I removed the stock motor (that was locked up) and started to tear into it. I was planning on using my 1300 Venture motor, but I wanted to see how bad the VMax motor was. I now have it cleaned up...

Well, I'm selling my old bikes.... some old HD Sprints and a 1966 Yamaha YM-1 to make a little $$ for my winter project. I've been picking up a few parts here and there, and I finally went out to the garage and put some of it together and walla... I have a 1300 Venture motor that I need to get...

Here is my new project bike. It was a little neglected by its previous owner, but I was told it ran like a champ when he stop riding it. I found it for sale outside Chadron NE, and picked it up for a mere $25. Talk about a diamond in the rough! A little seaform in the tank and this baby will be...

Well I have several hobbies, and have been into drag racing and hot rods since I can remember. Thought I'd share what is stealing some of the V-Max Mod money. 1967 Dart 2 Door Post Project When I got it The 8.25 Rear End it came with It's GONE! Moving leaf springs inboard to mini tub...

So far, 2006 V-max with the following mods: Otec trees and swingarm. R-1 fork legs. Lightcon wheels, R-1 calipers. Mark's Pipes. Venture rear diff. FJR masters. This is taking forever. But, as you can see. There is light at the end of the tunnel. Looking forward to getting on the road! Walt