ignition coil resistance 3.6ohm. is that ok?

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rabit1

Well-Known Member
Joined
Jul 17, 2013
Messages
56
Reaction score
0
Location
LA
hi,

My rear ignition coils resistance are 3.5 and 3.6 ohm. the manual says it is supposed to be 2.7 +/- 10%. I have no idea if that is bad, ok, or good.

Is that ok? should I be worried.?

oh btw, the resistance on the secondary are according to spec at 13k ohm.

Thanks
regards,
 
That's fine. You have to take temperature into account. Mine are 3.3-3.4.
 
Thank you maleko89, yeah I think the temp on the manual is 20 degrees C. It was about 26 here I think. Thanks again
 
Thank you maleko89, yeah I think the temp on the manual is 20 degrees C. It was about 26 here I think. Thanks again


20 degrees C is about 68 degrees F. 26 is about 78.
 
Back
Top