I have searched the threads with no luck. I know the answer is there but can't find it. My bike started fine ran for about a half mile and died. I pulled
over and let it sit for about ten minutes and she fired right back up again and then died again about a half mile. I trailered it got it home and she fired again. I replaced the fuel pump as it was only
20 bucks on e-bay and since its a 2000 I figured it was due. Now I have no power to the fuel pump.
[zitzelbj] 8:58 am: I replaced the fuel relay as I had an extra and it only shows input on the power line side not the load side. I've read things about it could be the reserve switch, etc... but before I
start down that rabbit hole I was wondering if anyone has run into this and where I should start. I checked the fuses but not the master. Everything lights up and with power to the lineside of the
relay I don't think its the master fuse:bang head:
over and let it sit for about ten minutes and she fired right back up again and then died again about a half mile. I trailered it got it home and she fired again. I replaced the fuel pump as it was only
20 bucks on e-bay and since its a 2000 I figured it was due. Now I have no power to the fuel pump.
[zitzelbj] 8:58 am: I replaced the fuel relay as I had an extra and it only shows input on the power line side not the load side. I've read things about it could be the reserve switch, etc... but before I
start down that rabbit hole I was wondering if anyone has run into this and where I should start. I checked the fuses but not the master. Everything lights up and with power to the lineside of the
relay I don't think its the master fuse:bang head: