Pick-up coil needed 90-07 VMax

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dingy

Well-Known Member
Joined
Jul 26, 2009
Messages
583
Reaction score
1
Location
Mansfield Ohio
Anyone have a single pick-up coil that they would part with.

A 6 lobe rotor would be nice also, but I have located one of those on ebay.

Gary
 
I will have a single pickup within a week or so Gary. Tell me more about that 6 lobe rotor...
 
I will have a single pickup within a week or so Gary. Tell me more about that 6 lobe rotor...

I found this picture on ebay which is a rotor from a 90 Venture, which is a single pickup coil.

The ignitech software shows the setup for the single pickup coils has 6 lobes at rotor. But they have also been known to manipulate settings to get software to work.

I have been misinformed before.

Gary
 

Attachments

  • 9-18-2012 8-00-44 PM.jpg
    9-18-2012 8-00-44 PM.jpg
    30.1 KB · Views: 6
  • 9-18-2012 8-03-19 PM.jpg
    9-18-2012 8-03-19 PM.jpg
    63.6 KB · Views: 6
The early 85-89 has two long pickup lobes. The later models have the multi lobes. I have good used parts but I won't be as cheap as ebay.

Sean
 
Back
Top