post your stage 7 or morely jets your using

[mattmullins]

Trying to get my stuff dialed in the rest of the way had a rich issue now a lean issue, so let me know what your running sea level above sea mains pipes stock or 177.5 paj2 maines and so on thanks man.

 

[gamorg02]

theres a thread somewhere in the carb section with lots of members configs

 

[mattmullins]

Been trying to find it

 

[gamorg02]

hmm i can't either. ask KJ i bet he knows

 

[ninjaneer]

you guy's talking about this one? OEM Carbs? Post your setup

 

[[email protected]]

you guy's talking about this one? OEM Carbs? Post your setup

Yep, thats it.
I tried to get one of those going long ago. It never really caught on though.
http://www.vmaxforum.net/showthread.php?t=8555

 

[mattmullins]

Ok been running rich for a while no matter what jet I used then I changed the paj2 and everything went lean as hell went from 152.5 mains to 165 main jet and it is running ffn fast had to take back and put in the stock paj2 I think I had a bug in the carbs that sucked free. So hears what I have 800'-1000' above sea morely muscle kit dyna 3000 stock setting carbs 165 mains stage 1 needle 3rd from top a/f 3 turns out floats at 1.125" stock paj2 dale walker 4-2 front shocks lowered 2" rear 1 1/2" ufo seat kick stand ,risers drag bars, spike grips, mirrors that look like knives ,shinko 170 rear tire 8mm spark plug wires new dyno coming soon maybe Saturday. Ps I'm sure I forgot somthing. My lean thing happend about 5000rpm's stopped when I worked my way up to the 165 mukuni I would do the wot kill it then check the plugs and they were white, haven't checked them yet withe 165mj will update later this week

 

[KJShover]

Here is my setup....

Altitide: 440 Feet
Exhaust: Kerker 4-2-1, Carbon fiber can (12") 2" comp baffle/turned down tip
Stock carbs: Morley Muscle Kit (slides not drilled)
Mains: 150 Mikuni
PAJ 1: 90 Mikuni
PAJ 2: 177.5 Mikuni
Needles: Stage 7 (clip 4th from the blunt end)
Springs: Stage 7
A/F: Varies from cyl to cyl, 3.25-3.5 turns out.
Vboost: Stock

 

[speedcostsmoney]

altitude 400 feet
exhaust U.F.O. 4-2 2 inch straight pipe
stock carbs slides drilled from factory
Mains 2mm ( 201 )
PAJ 1 STOCK
PAJ 2 STOCK
NEEDLES STAGE 7 K & N 4TH FROM TOP
SPRINGS STAGE 7 K & N
A/F 3 TURNS
VBOOST STOCK