quick front wheel measurements

[gamorg02]

hey anyone have a front wheel laying around they can grab a few measurements for me quick?

1 - distance between the inside of the two rotors (mating surface to mating surface)

2 - distance between the outside of the two bearings.

Thanks!

 

[G Man]

hey anyone have a front wheel laying around they can grab a few measurements for me quick?

1 - distance between the inside of the two rotors (mating surface to mating surface)

2 - distance between the outside of the two bearings.

Thanks!

Hi Garrett.

#1: 122mm

#2: 103mm

Disclaimer: As best I could focus my fuzzy eyes in my un-heated workshop... LOL :biglaugh:


Hope this helps.
G Man

 

[gamorg02]

Hi Garrett.

#1: 122mm

#2: 103mm

Disclaimer: As best I could focus my fuzzy eyes in my un-heated workshop... LOL :biglaugh:


Hope this helps.
G Man

nah thats good man. finally got my venture rim in that i was thinking of machining down to match a vmax. i ended up going a different route in the meantime but was curious how far off they were

looks like #1 is 132mm on the venture and #2 is 118mm on the venture...

i think its a 2.75 vs 2.2 rim as well so the wider dimensions make sense.

 

[Diablotin]

sounds like the 120 tire will go on a wider rim soon

 

[gamorg02]

very soon michael!

 

[tugla]

sweet will look cool, but can only tell when you pist a pic man

 

[95spfldmax]

sounds like the 120 tire will go on a wider rim soon

I have a 120 on my front stock rim. Would think you could go even a little wider if you wanted to.

 

[gamorg02]

I have a 120 on my front stock rim. Would think you could go even a little wider if you wanted to.

not when its a 120/70, the sidewall being so short it makes the tread wrap around