headknocker
Well-Known Member
Wow!!!!!!
unk:
unk:
My two babes... Yeti and Grizzly
- Thread starter wildweasel_pt
- Start date
Help Support VMAX Forum:
tmosel
Well-Known Member
Those are Bad Ass!!!
wildweasel_pt
Well-Known Member
Well here goes some pics of one of the best things on Grizzly... The paint job...
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
By wildweasel_pt at 2011-01-15
wildweasel_pt
Well-Known Member
Regarding the specs... Here it goes...
The bike is a Canadian spec V-Max
One off custom made alloy frame (which has solved v-max notorious bad cornering)
Custom made Dymag wheels
Custom made 20ltr + tank
Custom made ducktail rear end & rack & side panels
Custom made triples, risers, stainless steel rear guard with lights, custom made front mudguard
ISR 6 pot calipers front and 4 pot Billet rear
Custom made rad & oil cooler
Dyna stage 7
NoS
White power upside down forks
Twin halogen bulbs
Custom made alloy footpegs
AP Racing rear brake master
Reinforced clutch spring
Braided lines allover
Rad fan override
Electronic ignition
Laser Pro stock 4x2 exhaust
Custom made alloy swingarm
Bored engine
Cutting things short the only stock is the speedmeter, the double gauge and lighting cluster, the handlebar switch assemblies and the rear brake disc (already scheduled to bail out)
The bike is a Canadian spec V-Max
One off custom made alloy frame (which has solved v-max notorious bad cornering)
Custom made Dymag wheels
Custom made 20ltr + tank
Custom made ducktail rear end & rack & side panels
Custom made triples, risers, stainless steel rear guard with lights, custom made front mudguard
ISR 6 pot calipers front and 4 pot Billet rear
Custom made rad & oil cooler
Dyna stage 7
NoS
White power upside down forks
Twin halogen bulbs
Custom made alloy footpegs
AP Racing rear brake master
Reinforced clutch spring
Braided lines allover
Rad fan override
Electronic ignition
Laser Pro stock 4x2 exhaust
Custom made alloy swingarm
Bored engine
Cutting things short the only stock is the speedmeter, the double gauge and lighting cluster, the handlebar switch assemblies and the rear brake disc (already scheduled to bail out)
Redbone
Well-Known Member
WoW! That paint is friggin' sweet! Lots and lots of NICE details WW_pt!!:thumbs up::thumbs up:
satariel666
Well-Known Member
Heavy Metal animated movie.
wildweasel_pt
Well-Known Member
Ha ha... Its manga... Hey Satariel... how can i get one of those purple hearts? I wasted my credit already... i was riding Yeti as in a rodeo and she kicked back... lol...
Not really. I was run over by 2 cars... Yes 2... You heard it correctly...
They should be :th_biggun:
Never saw the drivers...
Not really. I was run over by 2 cars... Yes 2... You heard it correctly...
They should be :th_biggun:
Never saw the drivers...
wildweasel_pt
Well-Known Member
Yeti's front end is going to change... Already made the mockup... Nevermind the rim's color... 3 different brands just in the front... Yamaha, Suzuki and Kawasaki... This is like the Scrapyard Wars... he he
By wildweasel_pt at 2011-01-17
By wildweasel_pt at 2011-01-17
By wildweasel_pt at 2011-01-17
By wildweasel_pt at 2011-01-17
Diablotin
Well-Known Member
the paint job is inspired of a comic named Succubus.
I read it when I was in France.
Violent and a bit hardcore
I read it when I was in France.
Violent and a bit hardcore
satariel666
Well-Known Member
Im not sure cuz I dont care about any awards but i guess you need to make your v-max looks like that:
the paint job is inspired of a comic named Succubus.
I read it when I was in France.
Violent and a bit hardcore
The lady is Heavy Metal inspirated for sure.
wildweasel_pt
Well-Known Member
Those R1 calipers do really brake good... :biglaugh:
I sideswiped both cars like ricocheting on each one of them on both sides. In the end i was able to keep the bike with rubber down but when i stopped after all the crashing and swerving i fell to the side coz i wasn't able to put my feet on the ground with both ankles broken... I got less aparent damage with scraped mufflers, broken rad and multiple broken engine covers... Besides the fact i stayed in hospital for a month. :stretche:
They had a cute nurse though... :th_people557:
I sideswiped both cars like ricocheting on each one of them on both sides. In the end i was able to keep the bike with rubber down but when i stopped after all the crashing and swerving i fell to the side coz i wasn't able to put my feet on the ground with both ankles broken... I got less aparent damage with scraped mufflers, broken rad and multiple broken engine covers... Besides the fact i stayed in hospital for a month. :stretche:
They had a cute nurse though... :th_people557:
:surprise: HOLY SHIT Fred,I didn't realise when you sent that pic you'd actually bought Grizzly!!
Look after her,dude,that bike is a fucking icon in the UK and one I've followed through the magazines for years. :worthy:
Oh,the paint is 'Lady Death' guys...check it out.
http://ladydeathuniverse.com/
Look after her,dude,that bike is a fucking icon in the UK and one I've followed through the magazines for years. :worthy:
Oh,the paint is 'Lady Death' guys...check it out.
http://ladydeathuniverse.com/
Diablotin
Well-Known Member
hehe finally someone who find out where the character is coming from
wildweasel_pt
Well-Known Member
Yeah dude... I went to Marks for a cup of coffee and brought her with me. Do you have Nobbys email by any chance? PM me if you do plz...
wildweasel_pt
Well-Known Member
If you can it'd be great. Thanks
satariel666
Well-Known Member
hehe finally someone who find out where the character is coming from
Never heard about LD but i can see strong inspiration from Heavy Metal animation.
At the first tought i'd say thats HM but i was wrong indeed.
wildweasel_pt
Well-Known Member
Today was the day for plastic molding... Got the polyurethane flowing to get the shapes...
Tomorrow will be carving day...
Here some pics of how i did it... That sucker bloats like hell... Its gonna make me work well tomorrow...
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
Tomorrow will be carving day...
Here some pics of how i did it... That sucker bloats like hell... Its gonna make me work well tomorrow...
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
By wildweasel_pt at 2011-01-26
wildweasel_pt
Well-Known Member
Well after lots of sanding and turning my garage in one of those styrofoam pellets pools for kids im halfway done to get the fiber on... Just some more fine tune and tomorrow time to pick up the brush and the roll and start to apply some fiberglass...
By wildweasel_pt at 2011-01-31
By wildweasel_pt at 2011-01-31
By wildweasel_pt at 2011-01-31
By wildweasel_pt at 2011-01-31
By wildweasel_pt at 2011-01-31
By wildweasel_pt at 2011-01-31
By wildweasel_pt at 2011-01-31
By wildweasel_pt at 2011-01-31
wildweasel_pt
Well-Known Member
Well... Today i got the fiber on... Tomorrow some more sanding and another layer of fiber. After that it will be carved on the inside to remove all the foam and get some more fiber on the inside for stiffness...
