fixed

Well, one more mod done last night. Did the color led swap in the gauges to red. Love it! Also did the right side electrical control maintenance because my gauge lights would not come on in the speedo. While it was bad in there and needed to be done, speedo bulbs would still not light. Decided...

So I fixed the kickstand issue, it was in fact the relay and the new (used) one I got from ebay didn't work either so I just unplugged it and it worked. The new issue is that when I get to the end of a straight line drive and let it drop to idle, it dies. Immediately I thought it had to be...

I still need to drain the bowls and such, but I turned all 4 air screws in then 3/4 turn out and the mystery problem totally went away xD Also, it may just be how carb bikes are, but say I'm cruising along at X rpm, it will feel like the motor is weak initially when I touch the throttle, it...

I've been fighting with a rough idle for a long time and read all the posts about this on the forum. When the bike gets past the "normal" operating temp...close to the red but never overheating it would run rough and sometimes stall at lights and intersections...not good or safe! I received...

Good news. (well, maybe for some) The Obamacare website has been fixed..... apply now... just hit the "apply" button http://rexharrisonshat.com/healthcare/

I dont post much normally just read and do searches for insight. Last yr around june my vmax started seriously over heating. It has always been on the verge in the summer heat. I couldnt keep coolant in it, me being worst case scenario all the time I thought head gasket, after all 40k and not...

Took test run today... Ten clicks... Shifts wayyy smoother now. Many many thanks to Sean morley for answering countless emails while i was doing it. Best part is no leftover bolts or screws or parts.... Always a good sign lol. I definitely recommend the.undercut trans to anyone with second gear...

My odo and speedo work fine but the damn trip meter rolls all three of the mileage indicators when the 1/10 mile indicator cycles. I can get it all to re-set to 0 if I play with it but it still cycles all three. I only average 85-90 miles per tank before my fuel light comes on and I hate...

I have a set of Galfer front braided brake lines that some one ordered & never paid for there $ 80 bucks plus shipping. email [email protected] or call 813-270-0000 Thanks,Kyle

One of my Best Mods on my Gen 1 Vmax was the DD Clutch Spring. I found that using two stacked clutch springs greatly improved my clutch engagement and actually increased my clutch plates and discs life. I have used this arrangement on my modded Gen 2 for about 18 months and found it to be...

Brand new never installed kerker can available. $175 obo

It is time to let my stenten 45mm EFI go becouse I am building turbo for my vmax. Comes with all you need to get it running, can be sold with power commander witch makes tuning very easy + possibility to add extras like quickshifter, auto tuner, display etc etc. make me an offer and we will...

OEM backrest, glass beaded and ready for chroming, powdercoating, polishing or painting. Black upholstery in fair condition...$275. Buyer pays actual shipping costs. Thanks, George

I just bought these Cobras 2 weeks ago brand new for $400. I have ridden only about 500 miles with them and have ordered a full system, that is why I'm selling them. They are in perfect condition. $300 Located in Tampa, FL area. Buyer pays actual shipping costs. Thanks for looking, George

1997 Vmax with pro taper handle bars custom grips VGas 39mmm keihin slide carbs PCW comp cams ported polish intake and exhaust PCW headers, custom tips custom lowered seat progressive springs coernce carbon fiber fairing and belly pan custom paint engine guards dyna 3000 low resistant plug...

Brand new chrome set (still in box) of Progressive Motorcycle Shocks. Model # 412-4207C Shocks are 12 1/2 in length and brand new! Call 570 498-9308 or email [email protected] with any questions or offers. I also have a Chrome rear grab bar for sale for1985 to 2008 Vmax asking $200 or best offer...

1986 Vmax I was having problems with the start button not working figured out I had a 2 wire starter relay that was grounded got that fixed and took the bike for a ride got about a 1/4 mile and it cut off after letting it sit for a minute or two I cranked it back up and rode about a 1/4 mile and...

It Just got back from plating. New grab bar for Yamaha Vmax. Triple plated with show chrome and in new condition. I just mounted it on my Vmax build ,but I decided to go with a 300 rear tire and this grab bar wont fit with the widened fender. I had it mounted on the bike for only a few minutes...

I'm pissed - my stupid tank bag that I rarely used put two HUGE scratches (ok not that big) on the side of my tank. Can it be buffed out? How expensive are they to replace? Not that deep but deep enough you can feel it with your fingers...

My best friend and riding partner is my husband David. We argue plenty but he's a keeper overall: a fine rider, good character, and faithful as an old hound dog. When we were just married in active duty Army and living in what amounted to a chicken shack, each with one po-dunk old cruiser and...