zombie6513
Active Member
i replaced grips with universal iso grips now the throttle sticks may be screwed on fixing this any ideas.........
i replaced grips with universal iso grips now the throttle sticks may be screwed on fixing this any ideas.........
I installed these on a buddies Vmax a couple weeks ago without any issues... Not sure where you went wrong except to say that you may want to make sure the end cap isn't hitting the bar keeping the throttle tube from moving smoothly.
its not the end cap i guess i'll live with sticking throttle i don't see that grip coming back off thanks anyway
it sounds like you know from experience but it looks like its going to be tough releasing that glue i hope it comes off........If you glued your grips on you may have got some glue under or on the end of the throttle tube. This causes it to be stiff, stick or not return properly. You have to remove the grip to fix this problem. Don't ask me how I know.... :whistlin:
Barber pole the throttle sleeve with electrical tape to ensure tight fit.
Mark
#1098
Enter your email address to join: