Hi folks:
I'm trying to find out if you know of any place I can buy an OEM Yamaha tool that appears to be no longer manufactured.
It's a damper rod holder (part # YM-01445) for the 1994 YZF750 USD forks I've installed on my Max. I cannot find ANYONE ANYWHERE who still sells this! (And believe me, I've tried.) I've also consulted methods for homemade tools to do this, but the YZF750 sites I've posted on are fruitless, and I'm not sure the homemade tools I have seen will work on these particular forks
I've tried the 2 person technique of compressing the forks as far as they go to tighten the damperrod bolt, after replacing the copper washer on the damper rod bolt, but the dang bolt will NOT tighten, and the fork is still slowly leaking oil.
Anyway, the Yamaha part # YM-01445 (Damper Rod Holder.)
Any suggestions?
Thanks muchly.
Elimax
I'm trying to find out if you know of any place I can buy an OEM Yamaha tool that appears to be no longer manufactured.
It's a damper rod holder (part # YM-01445) for the 1994 YZF750 USD forks I've installed on my Max. I cannot find ANYONE ANYWHERE who still sells this! (And believe me, I've tried.) I've also consulted methods for homemade tools to do this, but the YZF750 sites I've posted on are fruitless, and I'm not sure the homemade tools I have seen will work on these particular forks
I've tried the 2 person technique of compressing the forks as far as they go to tighten the damperrod bolt, after replacing the copper washer on the damper rod bolt, but the dang bolt will NOT tighten, and the fork is still slowly leaking oil.
Anyway, the Yamaha part # YM-01445 (Damper Rod Holder.)
Any suggestions?
Thanks muchly.
Elimax