diaphragm

Yamaha Star V-Max VMAX Motorcycle Discussion Forum

Help Support VMAX Forum:

  1. V

    Diaphragm air hole measurement

    Hello- I would like to know the diameter of the original hole near the needle, the one that is usually enlarged when installing a Dynojet kit Thanks, Henry
  2. A

    Front brake caliper diaphragm

    Front brake reservoir diaphragm Front brake reservoir diaphragm ,,lost after rebuild ,, needed asap pleeeease
  3. D

    Carburetor Slide & Diaphragm

    I did the shotgun and when spraying the slides and diaphragms down, I noticed a hairline crack going from the top to the bottom on one of the slides. I'm going to check and see if I still have my "spare" one. If I don't...where's the cheapest place to get one (as a unit minus the needle)
  4. maleko89

    New option to replacing slides/rubbers

    I was reading one of my many moto-magazines and there was a question on what to do when a replacement slide was not available. The first option was replacement rubbers which most of you are already familiar with. The second option was to use Loctite roofing sealant. It sounds like others have...
  5. E

    Fuel pump missing diaphragm?

    So I have been having issues with my 88 Vmax's fuel pump where before it would cut out when I gave it any throttle and now it doesn't even turn over. I have tried a different fuel pump to the same results AKA not running. It appears to me I am missing both of my little rubber diaphragms inside...
  6. V

    double diaphragm spring clutch kit

    Hi guys what do you all think of the double diaphragm spring clutch kit? is it worth installing? i am just about to get my clutch plates replaced as I'm getting a slip on the higher gears and was just looking into this. what feedback have you'll got for this? easy to install, life etc. Thanks...
  7. D

    Diaphragm needed

    I have a ripped diaphragm and need to replace it. Anyone know where to get one at a reasonable price?
  8. CALI-gula

    Gobs of Oil in the Coolant Reservoir... water pump gasket or diaphragm?

    We've had a week or so of 100 degree weather. I ride EVERY DAY in Los Angeles to and from work (for the past 22 years) but I especially noticed the bike running hotter than usual a few late afternoons last week, and some overflow from the down-tube of the coolant reservoir dripping beneath the...
  9. dannymax

    Diaphragm replacement at BRC

    Ship us your slides with worn out diaphragms, we will send them back with new, high quality, aftermarket, rubber replacements. (4) diaphragms mounted to your slides......$175.00 + shpg. (4) diaphragms mounted to your slides as part of a carb/cleaning project.........$155.00
  10. M

    Fix the fuel pump every few days?

    Last year, after many years of trouble-free operation, my fuel pump started the continuous clicking when the key was turned on. I found the fix here on the forum (What to do when your fuel pump clicks like a SOB) and tried it. The first time I did it, it worked for several months, then started...
  11. COP RUNNER

    i I NEED 4 CARB. DIAPHRAGM COVERS

    i DOES ANYONE HAVE 4 CARB. DIAPHRAGM COVERS THAT THEY CAN PART WITH ? ... I NEED THEM AND WOULD LIKE TO BUY THEM ! .... WORST CASE IF I CAN BORROW THEM AND MAIL THEM BACK TO YOU WHEN I'M DONE , BUT I'D RATHER BUY THEM ! . :confused2:
  12. P

    Where to buy new or good condition carb diaphragm covers?

    Hello, As the title says: Where can I find new or good condition carb diaphragm covers? I'm talking about those cover with the ph2 screw heads that sits so damn tight. I used a vice grip to remove them and accidentally made a fat scratch on one of them... Can't seem to find any OEM motorcycle...
  13. M

    Carb body diaphragm housing stripped

    I guess I used a little more force then necessary and stripped the threads on the body of the carb for the diaphragm cover. Has anyone tried to fill up the hole and re tap? I thought about using JB weld but read alot of poor reviews on the products performance.:ummm: If all else fails..... let...
  14. 2

    NEEDED DIAPHRAGM RESERVOR for Master cylinder

    Hello Guys need to get each side of the clutch and master cylinder diaphragm for my bike who is the cheapest out there?
  15. alorio1

    How to replace carb slide diaphragm

    Soak slides fully submerged in WD 40 overnight to loosen glue. Then instead of using a screwdriver to knock slide loose from diaphragm holder, I use a deep well 3/8 drive socket with a 6 inch extension to drive the slide loose from diaphragm holder instead of a screwdriver which is where most...
  16. ninjaneer

    Diaphragm soak?

    Am wondering if its a good idea or not to recondition the diaphragms and if so with what or how (if anybody's done this before). Last time I had them out they looked OK, but am considering of going stage 7 and figure while their out why not do some preventative maintenance if feasible--cuz man...
  17. V

    Slide Diaphragm Ok?

    Just wondering if this slide diaphragm is shot? It has a small rip near the edge but the rip does not go all the way through. Otherwise the rubber still seems pliable.
  18. SpecOps13

    Holy Diaphragm..

    I went through last night and troubleshot my 89's left front carb. The plug was looking a little strange. The top 1/16" of the insulator was white and the rest was black. All of the other plugs are rich, Eventually I'll change the main jets. I'm kinda taking a break and getting some riding in...
  19. Blujay

    Slide diaphragm rubbers

    I pulled the carburetor slide covers off to do the "Shotgun" cleaning procedure and found the slide diaphragm rubbers are begining to fall apart. I found some replacement rubbers on ebay and was wondering if anyone here has changed just the rubbers on the slide assemblies. It sure would save a...
  20. i_was_here1st

    Carb Slide Diaphragm Questions

    Hello, i was recently enjoying a lovely, legal ride down the street, obeying all the speed and traffic laws like a good little citizen, when I noticed my max seemed to be running a little boggy. Several minutes later, at home, I pulled off the airbox and notice one of the Slide Diaphragm that...
Top