VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Fire-medic

    Block-off plate at VBoost rubber donut

    Taking your carbs off for a cleaning, because your low speed jets/passages are plugged? Want to avoid your child throwing some toy into your VBoost passage? Want something classier than your old socks stuffed into the holes? Visit your local hardware store, go to the plumbing section and buy...
  2. Vrooom

    License Side Plate bracket

    Dimensions ??? Sent from my iPhone using Tapatalk
  3. spottedsquirl

    Throttle plate screws

    I have an 85 Max that needs a set of throttle plate screws for all carbs. Anyone know where I can get em? Thanks. Sent from my SAMSUNG-SGH-I337 using Tapatalk
  4. R

    License plate bracket

    Hey all! I went on a ride last weekend on my gen 1 and noticed half way through that my license plate had fallen off. Upon closer inspection, I saw that the rear undertail had fractured at some point right above where the plate mounts. Now I have nothing to mount another plate to. Options now...
  5. R

    where do i find this license plate holder

    as the title says where can i find this at? i removed my factory light and installed leds in the grab bar but would like the plate some what in the factory location.
  6. Bill Seward

    New Plate!

    Just got it today.
  7. Bill Seward

    New Plate!

    I tried to get my old custom plate registered to the Max. It said "GODZILLA". No luck, over the time I wasn't using the plate, someone else got it. I wound up getting 145BHP..
  8. R

    ID Plate on Transmission

    I purchased a wrecked 1997 VMAX to use for parts. The engine looks very clean from the outside and I noticed a marking on the right-hand side of trans. It says 3500 cm3. Can someone tell me what this marking is and what it identifies? :ummm: If I found this on a car, I would think it...
  9. J

    My custom mounted liscense plate holder/bracket

    Hello, I had been wanting to remove my tailight w/factory liscense plate mount. I already have a Sean Moreleys Muscle custom red reflector tail/brake light and aftermarket LED turn signals that have tail/brake light function. So, this is what I did. Please let me know what you think. Thanks...

    Got my personalized plate today

    I like it what do you guys think, It's not on the bike yet I still have it apart doing a few mods while I waited for some parts to get here. Now if I happen to get the seat I bought from Sean in the next few weeks I might just wait until it gets here to put it all back together. No pressure on...

    Help me pick my Personalized plate

    I'm going to get a personalized plate, I can have 6 letters or numbers in a plate. I thought if any of you want to suggest some that would be cool but I think it is hard to pick a personalized plate for someone they don't know. My wife and I had a discussion last night and she said I should...
  12. 9

    Rear fender metal plate holder

    Hi, I am looking for the metal part of the rear subfender that the license plate mounts to. Thanks, Kevin
  13. Sweatysac

    Easy Rear tail light and licence plate mod

    Here is a little mod that I find beautiful, costs only 30$ and takes 30 minutes to do!
  14. BigJimi

    New Plate Came Today

  15. donnelly317

    Removing face plate on gauges

    Is there a easy way to remove solve faceplate from teach/temp/ and warning lights? I painted it and I dont like the way it looks. Looks like poop Sent from my SCH-I535 using Tapatalk
  16. ManicMike

    Michigan license plate law

    257.225 Registration plate; attachment to vehicle; legibility; color; distinctive registration plates; name plate, insignia, or advertising device; limitation; historic military vehicle; violation as civil infraction. Sec. 225. (1) Except as otherwise provided in this subsection and subsection...
  17. H

    clutch 1/2 plate

    should i get rid of it and add another diaphragm ? as the max is sliping when i power on at 100 + mph carnt have that :rocket bike:
  18. woodsman30

    licence plate holder fender?

    I know at one time I seen a thread about the plate holders and the inner fender and opptions to change the brake light any ideas.:ummm:
  19. charlieRobinson

    Metal Plate Under Rear Fender

    Not sure where to put this and can't find an answer elsewhere.. The metal plate bolted under the rear fender: Is this 100% necessary? I don't see a great purpose for it and I am considering deleting it. Please advise me if I am missing something and it is in my best interest to keep it...
  20. lawman504

    Virginia Inspection Sticker Plate

    Hey guys!! I bought my first VMAX yesterday and instantly fell in love with it. I found a 1985 pretty much all stock in great shape for a great price. The guy i bought it off of had "stacked" about 6 years worth of inspection stickers on top of each other on the left fork. I HATE THIS!!! I...