race

Has anyone run the Michelin power race (medium) radials? I have a new 190/50 ZR17 on back and a badly cupped Avon Azaro 120/70 ZR17 front. I want to replace it with a Michelin power race medium 120/70 zr17 but cant find one. where can I buy one? Or alternatives?

Yes, I have been riding the bedst dragrace of my life:punk:I cant get my arms down. I ran 6,77 and 163 km/t and i beat a busa:eusa_dance: but how fast can I expekt my vmax to do 1/8 race? My vmax have stock engine but whit flatslide carbs, 4,2,1 exhaust, 17"wheels and low as hell.

I sure wished my boost was working tonight. I pulled up beside a kawasaki nija 900 zxr9. Young fellow ..early 20"s I was in 1st gear and burped the throttle. He instantly changed his seating position, and I knew we were ON :biglaugh: I hit it first and took it up to 8000rpm ,hit 2nd 8000,hit...

I am trying to put together a bit more comprehensive set of instructions for doing this install. well, trying to install my set and not muck it all up. On my 86 I am looking to drop the front about an inch. The bottoming out springs that came with the kit are longer than the stock ones...

So I ride with my friends when we can. They ride: 09 Iron883 sportster, Stage I. 09 1200 custom ?? Dyna and heres the recent ones: 08 Vrod "NightRod" Stage I 09 Vrod "Muscle" Stage I Well, my bro and I swapped bikes for a stretch and I ended up on the 09 Muscle. Bike feels low and...

http://www.quikclikrt.com/ It's kinda fun!!!:eusa_dance:

Some one traded in an 1800 gold wing at work & one of the sales guys was back there making fun of it while I was working on it so I challenged him to a race on it against his 103 street glide he was not making to much fun of it any more after we got back to the shop.LOL

Is anybody interested in purchasing a 3 speed full auto drag race tranny for their Vmax? The transmission can be used for a small tire (chain drive conversion) or a big tire (sprocket located out board of engine cases) drag bike.

I called Race Tech today to get a price on front spring and a lowering kit. the sales rep told me they dont offer spacers so it would have to be an in house deal were i send them my forks. This doesn't sound right to me. can someone who has lowered their front end with race tech's shed some...

Hi all: I'm about to have in my possession a good heat gun (specifically, a Master Appliance HG501A Master Heat Gun that TURBOVMAX recommended.) Any instructions from y'all regarding the removal of my bottom steering head bearing race with this tool? Thanks very much! Elimax

I mixed some 110 octane race fuel into my max today. Does anyone know if this will hurt anything ? It feels a little crisper.

Hi all: I read Gleno's great post about steering, bearings, and race removal, and am in the midst of trying to remove the bearing race from the bottom of my '89 Max. Now, Gleno talks about using the diamond Dremel tips to cut thru that bottom race. I bought a bunch of them, and have ground...

I hooked up the camera again for the drag strip. The runs are against a GSXR 600, an unknown bike, then GSXR 1100 (overbored to 1200 and running a slick), and a new 2009 GSXR 1000. The slick gave the 1100 a real advantage through 1st gear. The new gixxer hauls ass against me. In the first two...

I have an otherwise stock 2003 front suspension with Race Tech 1.0 fixed rate springs and cartridge emulators. The rear shocks are Progressive 418's at 12.5 " long. Since the Progressives are shorter than stock, I'm guessing I need to lower the front about 1" or so. I have done that by raising...

either the 900 or 1000 Just curious as to how they would compare to a Max

Took a trip out to freeport on the Max this morning. My good friend Al lives out that way. It's 90 miles west of my house. He owns an 07BMW R1200GS. Last year when I bought my max and it was running like watery dog shit he raced me and beat me by a few lenghts. My bike was missing all...

IF YOU GOT TO SEE THE CATALUNYA MOTOGP RACE YOU KNOW WHAT I AM TALKING ABOUT:punk:. ROSSI AND LORENZO CHANGED THE LEAD 3 TIMES :biglaugh:ON THE FINAL LAP!! I WONT SPOIL IT:confused2: BUT WHAT A RACE!

I'll be heading to Cordova this coming Sunday for a track rental day if anyone else is intersted. I'm hoping to get a few more bugs worked out on the turbo bike. THE DAVID CREBO MEMORIAL 2009 DRAG CHALLENGE Hosted by DSMCentral AT CORDOVA DRAGWAY PARK SUNDAY ? JUNE 7, 2009 RACING FROM NOON...

This was my third time out and I mounted the camera. The second time I ran, the starting-line dude walked around it and asked if it was turbocharged. Two runs were almost identical, ET 11.7 seconds at 123ish with RT 0.66 twice. My 60 foot ET is around 2 seconds. I am at 4000' elevation and...

I bought a race ecu for the 09 but when i installed it in the bike it would not start so i thought it was faulty and sent it back.The replacement one showed up today and it still wont start.There must be a difference between us and canada vmax.I need if anyone has it a wiring harness diagram of...