Highly modified 2000 VMAX For Sale

[dekberg]

2000 Yamaha VMAX with tons of extras/modification ($6,000 OBO)

Bike runs, sounds and rides great.

122 Rear Wheel HP (RWHP)

Approximately 29,000 miles

Clear title

Bike has as won first place in two bike shows for best metric cruiser.

Engine was pulled last year, transmission was completely replaced, pistons polished and all new engine seals and gaskets.

Extras/Modifications:
- Chrome fenders, engine cover (faux gas tank), handlebar clamp and scoops
- 2007 VMAX Black/Red pinstriped rims
- Powder coated fork tubes, triple trees, rear swing arm and differential (final drive)
- Barnett clutch
- R1 Front brake calipers
- UFO Drag handlebars
- Slotted and wave front disk brakes
- Slotted rear disk brake
- Silver braided brake lines, clutch line, oil pressure line and throttle cables
- Progressive fork springs
- 11.5” Progressive 440 rear shocks
- Starfighter seat (sits approx 2” lower than stock seat)
- Dale Walker Holeshot exhaust
- Exhaust is heat wrapped
- Carbon fiber side covers, engine covers and instrument panel
- Chrome instrument panel cover
- Chromed Cyber Light with handmade lower mask
- Handmade rear engine covers
- Zboost switch (allows you to run Vboost off, on all the time or on at 3000 rpm)
- Dyno Jet Stage 7 carburetor kit
- K&N Filters
- Lower engine cylinder covers
- Coil Over Plugs (COPs) modification
- Billet aluminum inserts for the water pump, clutch, stator and transmission covers
- Exactrepmachined aluminum water pump elbow joint
- Billet aluminum fork brace (powder coated black)
- 4” tachometer
- Auto Meter C2 oil pressure gauge
- Two shift lights
- Slotted rear brake arm (chromed)
- Kuryakyn front and rear foot pegs
- Streetfighter grip mirror
- Nissin adjustable brake and clutch levers
- K&P cleanable/permanent oil filter
- Billet Aluminum exhaust clamp, ignition cover and real shock caps
- Chrome carburetor diaphragm covers
- Chrome radiator side covers
- Chrome skull and fire front radiator cover
- Chrome fire scoop intake covers
- Silicone engine hoses with red braided heat sleeves
- Side mount license plate with three LED lights
- Integrated LED running, brake and turn signal lights
- Garman Foretrex GPS (used for speedometer and trip data)
- Motorcycle cover included

Bike is located in Universal City, Texas
Can tailor up to 500 miles.

 

[HyperPete]

No price. Are you giving it away?

 

[Fire-medic]

No price. Are you giving it away?

Maybe that $7500 #? First line in RED

 

[HyperPete]

Oh, my bad, I'm sorry. That red is very hard to read for my old eyes!
Wait, that wasn't there. My eyes aren't THAT bad!!!

Very nice bike. GLWS!!

 

[eggohead]

Billet aluminum water pump elbow joint? I am intrested in this. Not to buy but see what it looks like so I might have a buddy make me one or a couple to give out....I am not about selling items he makes me, I buy him lunches and he makes me stuff. Look at my bike pictures and you will see. Thinking about doing clear covers this winter as a project. He teaches CNC so they are always need in projects.

 

[Itgoes]

VERY nice, unique bike that looks meticulously put together and maintained.

Whoever buys it is really getting something special.

Good luck with the sale!

 

[Traumahawk]

Billet aluminum water pump elbow joint? I am intrested in this. Not to buy but see what it looks like so I might have a buddy make me one or a couple to give out....I am not about selling items he makes me, I buy him lunches and he makes me stuff. Look at my bike pictures and you will see. Thinking about doing clear covers this winter as a project. He teaches CNC so they are always need in projects.

He probably has this on his bike.

http://www.exactrep.com/acatalog/OTEC-Aluminuim-Water-Elbow-272E.html#SID=24

VERY NICE......VERY EXPENSIVE.

 

[[email protected]]

Billet aluminum water pump elbow joint? I am intrested in this. Not to buy but see what it looks like so I might have a buddy make me one or a couple to give out....I am not about selling items he makes me, I buy him lunches and he makes me stuff. Look at my bike pictures and you will see. Thinking about doing clear covers this winter as a project. He teaches CNC so they are always need in projects.

If your going to give some of these out, I'd like to be the first in line [emoji3]

 

[dekberg]

That's the one. Yes very pricey, especially with shipping.

He probably has this on his bike.

http://www.exactrep.com/acatalog/OTEC-Aluminuim-Water-Elbow-272E.html#SID=24

VERY NICE......VERY EXPENSIVE.

 

[dekberg]

VERY nice, unique bike that looks meticulously put together and maintained.

Whoever buys it is really getting something special.

Good luck with the sale!

THANKS BRO!!unk:

 

[dekberg]

Price dropped to $6000 OBO. A reasonable offer will be accepted.

 

[Redbone]

He probably has this on his bike.

http://www.exactrep.com/acatalog/OTEC-Aluminuim-Water-Elbow-272E.html#SID=24

VERY NICE......VERY EXPENSIVE.

Yes, but they do come with rubber "O" rings, so that makes it totally worth it!:biglaugh:

 

[dekberg]

Just posted in Ebay for $4000 min bid with no reserve. Bike has got to go.