is there an easy way to remove A/F mix screws?

[firefly]

I want to inspect the pilot screws (A/F mixture screws) , How do I get them out?
I thought of using a vacuum cleaner with a very small tip.
what do you guys use to get them out for inspection?
Thanks
________
BMW Z9

 

[Dreamster66]

unless you want to tear the air box off, use a small syringe (like a baby bulb one...the one moms use to clear the babies nose) and suck it out.

 

[firefly]

Is it that easy? thanks

unless you want to tear the air box off, use a small syringe (like a baby bulb one...the one moms use to clear the babies nose) and suck it out.

________
vapor lounge

 

[maleko89]

Loosen the mixture screw all the way, remove the slide and blow compressed air in PAJ2. Have a container waiting to catch the screw.

 

[firefly]

I want to check them without removing the slides.

Loosen the mixture screw all the way, remove the slide and blow compressed air in PAJ2. Have a container waiting to catch the screw.

________
List of Ford VIN codes history

 

[Rusty McNeil]

unless you want to tear the air box off, use a small syringe (like a baby bulb one...the one moms use to clear the babies nose) and suck it out.

The Snot Sucker Method!

That sounds like it would work!

I'll have to try it some time....

 

[jakeivan32]

I got mine out with some double sided tape on the end of the same flathead screwdriver I used to unscrew them.