mod

Okay guys, I was thinking of doing the drilled exhaust mod (5 1/2 inch holes in between the rivets) and was wondering does it sound nice? Does anyone else have it done? Does it decrease power? Thanks,

Can anyone direct me to the post Sean made about a month ago or so with instructions on the seat mod? Thank you, Paul

http://thereifixedit.com/2009/08/05/epic-kludge-photo-unnatural-union/

My max with a engineered to fit max swingarm and a 17"hayabusu wheel..lots of work ongoing..Campbell exhausts,,new front end to fit R1 USD with 3"extensions...wavy disc..braided lines all fitted..new paint job to complete...

Shopping around online for parts, pretty sure I'm going to throw a flow meter in line behind the fuel pump, and use a mini digital readout to show actual amount of fuel consumed, maybe use a panel mount display and cut it into the airbox shelter rather than hang something on the bars. Either...

My 90 Vmax turn signals never turned off, in fact I hadn't know for awhile that they ever should have, so I always had this habit of forgetting to switch them off. The solution was to wire in a couple of Piezo alarm transducers. I have them mounted in the headlight. Probably possible to run just...

Checking some of the older posts on the site, I came across the "solder solution for the battery crimp" mod. Is this something I should look into for my 06?? I don't seem to have any problems...and I don't want to either. Not sure if anyone with a newer max has come across this same issue or if...

As some of you know I just bought my 2007 VMAX, it has some really nice UFO exhaust on it but for a 53 year old a bit loud. I'm working on a trade with several people who have shown interest. I plan to take it out for a short ride and se if it seems as loud as it did on the 622 mile ride...

If I do the stock exhaust mod, drlling the baffle &or drilling holes in the end cap, will I need to rejet or can I just adjust the A/F? Elevation is 3400ft FWIW. Maybe I wont need to adjust anything, but I suspect it will be running rich. Just wanted to see what others have done. Thanks...

I have been having troubles since getting her going after winter, done the cop mod and went to go on a ride and ran like crap poping backfiring the good stuff came back checked cop wiring, it was good checked plugs and they were good (cleaned anyway). So I start with the carbs shotgun 4 times...

I have a question, This week I put together one of those timing advancer`s with the 470 ohm and 4k ohm resistor pack but, I`m not sure just what application it is used best for 1: taking off w.o.t. from a stop sign ?:confused2: 2:opening it up on the freeway ?:confused2: I`m worried about...

Seen someone list the COP mod. I've searched for it but didn't get any hits. Can someone post a link for the procedure for me? TIA.

Hey I'm polishing a front rim and was wondering if anyone has ever removed the center lip that is used for attaching snap on wheel weights?

I really don't like the headlight of my VMax, think it's too flat. I'd like to replace it with something more mean looking. Thinking about VTX headlight, but am afraid that'll be too big for the VMax. Are there any good headlight mods out there? :ummm:

Here is a pictorial of the install for Birdoprey's COP's . I apologize for the poor pic quality and the layout. This is the only way I know how to set it up. There are 10 pics, Numbered from the left, top row-#1 - #6, bottom row #7 - #10. #1- COP and wires with crimped spades #2- Factory...

I wasn't impressed with the OEM horn on my V-Max - it sounded more like a 50cc moped or scooter than a 1200cc Muscle Bike to me! So I set out to get a more appropriate sound, and here's how I went about it: Looking on fleaBay, I found this seller that listed a pair of chrome Air Horns for $15...

Thanks Johan! http://imageevent.com/jkvmax/regulatorrectifier

instead of cuting and welding your kickstand and weakining it you can try what I did. where the kickstand hits the stop you canuse a grinder and take the stop further back to put the kickstand further forward yes it is not flat when you kick it out but it is not badI have the 12.5'' rear shocks...

Has anyone done this mod and is it worth it??? :confused2...

Got some '88 front forks from eBay. Seller said the following: "Came out of a running bike with about 11k miles. Straight and pretty clean on the sliders..very little rusting. Seals were replaced a season befor being removed. Bike was lowered 1/2 inch by putting in different space. Fluid was...