powder

Can someone please confirm or deny that it will be ok to have the left side (exposed part only) of the differential Power Coated with the final drive gear portion of the assembly in place? I have removed everything else. See Image and thank you for your feedback in advance.

All parts fresh coated in silver metallic with clear coat. Scoops $ 200 side covers $ 75 risor set with turn signal crown handle bar risors & yamaha emblem below headlight. $ 110 $ 350 package deal for all the silver parts other wise prices are as stated. All prices plus pay apl...

Here is a small batch of parts I just did. Now I have to put it all together ..... Todd

When you powder coat is it possible to shade from one color to another. Like have a piece all one color...and then have black across the bottom?

Is it possible to disassemble the rear wheel for so that I can powder coat it? It has pins and rubber isolators that need to be removed without destroying them. They are expensive to replace new. Thanks!

I am thinking about taking off my stock rims on my 85 vmax and powder coating the rims, What i am wondering though is what will I be getting myself into, for example the bearings coming out and other problems any insight into this would be appreciated

I picked up my '86 max about 7 months ago. I paid $1700 for a mechanically sound bike that was missing a bunch of random small parts and was wreched cosmetically (spray bombed). I've slowly been getting the bike put back together properly and now I want to strip and paint it. I'm pretty set on...

Misiek93 sold me this great looking grab bar. Im hoping by going with black it will give it a leaner meaner look. Thanks Misiek93..........Mike

I want Maxine black instead of silver. murdered look. I've been told powder coating is better than paint. need your opinions.

I was talking to a guy who does powder coating and he says that now powder coating has some stuff that looks like chrome BUT he has yet to use it so my question anyone out there know anything about a chrome look alike color???:ummm:

Im considering having a set of rotors bead blasted and the carriers powder coated. Im concerned that no matter how careful the prep work is done, some powder is going to end up on the rotor buttons. Would this affect the semi-floating capabilities of my rotors? BTW, these are gen2 busa...

I know there are incredibly bright people here on this forum. So, I'm asking for any ideas to make a decent size oven for powder coating. I have the heating and controls part covered. Any help on ideas is appreciated. Obviously an oven can be bought, but not possible right now, $ not there. An...

Hi All, I'm in the middle of rebuilding my VMax and have a few questions. I'm looking for some opinions / experiences on the process of powder coating my cases and heads. I'm trying to figure out if this will work and will last. Currently, I've had the cylinders honed and matched to...

Just want to get some info of how people have powder coated their frames in the past, i want to get my frame done in the next year or so when i decide to pull the motor out. i was curious what people have done with the VIN number which is stamped into the frame, i am no expert but wouldn't the...

What kind of paint/coat can be used for the engine? I was thinking that I'd powder coat it. But will the powder coat be able to sustain the repetitive heat ups and cool downs of the engine? I'm especially worried around the exhaust ports where it is going to get VERY hot.

So I dropped some stuff off at my local powdercoater and told him that I laid the bike down and rashed one of the scoops over the summer. I Just put some body filler on it to smooth it out and painted over it. I asked if there was some kind of metal filler I could use and then powder coat over...

i found an older kerger 4 into 2 system but the headers are a little rough for $300, and wanted to find out how much to refinish before i bought it, the guy also has a stainless hindle 4 into 1 for cheap. So i called a powder coating shop 4 miles from my house to see if he knew were to get it...

I'll post some pics tonight, but I am starting to get comfortable enough with powder coating to make this offer to forum members. I've done my scoops, fork tubes, calipers, master cylinders, triple trees, turn signal bracket, handlebar clamp, sissy bar, and body panels. Here's how it'll work...

I know some of you have powder coated your clutch and brake reservours, how did you get the window out, I wonder if theres a way to replace them. Both of mine have tiny cracks on the outside. Kenny

Ok my max has a little wear and tear and some seems an easy fix - no rust or anything. My scoops and my sissy bar grab rail are the first things and most noticable to me. I can prob get some pics on here but they have a really bad case of I guess oxidization. Seems to be under the lacquer. A...