Is there a good resource for the size of bolts

[EAGLEPI]

Hi,
Does anyone know of a GOOD resource to find out what size bolts and screws that are on a VMAX ?

Ron

 

[maleko89]

The appendix in the service manual lists them.

 

[EAGLEPI]

Thanks Mark !

 

[gamorg02]

also as sean pointed out u can tell the bolt diameter and length by the part number

 

[EAGLEPI]

where and how?

 

[gamorg02]

ok so take a look at a microfiche. look at the 'steering' section. the bolts that go in the top of the handlebar clamp (#14 on some). that should be p/n: 91317-08030-00

from what i understand the second bunch of numbers means its an 8 mm(bolt diameter) and 30 mm long.

 

[EAGLEPI]

Sean told me to look at the microfiche for something else and gave me the address but I couldn't access the microfiche.

 

[gamorg02]

theres tons of 'em online.. try these:
http://www.bikebandit.com/houseofmotorcycles/yamaha-motorcycle-vmx1200r-v-max-2003/o/m8018
http://fiche.ronayers.com/Index.cfm.../YearID/44/Year/2003/ModelID/5930/Model/VMX12

 

[EAGLEPI]

I can see those thanks !

 

[zippo6]

Hi,
Does anyone know of a GOOD resource to find out what size bolts and screws that are on a VMAX ?

Ron

This might help too:
http://www.mikesayers.com/vmax/screws.htm

 

[satariel666]

You may have to buy a good caliper and screwthread sampler and always could define them by youself

 

[Redbone]

If you have a local Fastenal store they have a bolt gauge they sell or you can get one from them online.
There are several gauges at Nuts and Bolts dot com.