hypermax
Well-Known Member
My first post here!
I decided to modify the fender liner for a cat eye taillight and my own license plate bracket. I used a spot weld drill to remove the license plate bracket without damaging liner. I traced out the license plate bracket shape I wanted on paper then made one out of 22ga steel. I had to drill two holes slightly above the stock taillight mounting holes to get the location I wanted. It uses stock mounting hardware. The mounting bolts hold the license bracket fairly tight but I also JB welded it to the liner. I stayed with an incandesant light and like the look.
I decided to modify the fender liner for a cat eye taillight and my own license plate bracket. I used a spot weld drill to remove the license plate bracket without damaging liner. I traced out the license plate bracket shape I wanted on paper then made one out of 22ga steel. I had to drill two holes slightly above the stock taillight mounting holes to get the location I wanted. It uses stock mounting hardware. The mounting bolts hold the license bracket fairly tight but I also JB welded it to the liner. I stayed with an incandesant light and like the look.