disc

recently bought a 1988 vmax and it has rotors/brake discs that look like a rotory saw blade. Each tooth is about 1", thought they may have been home made , but just saw a pic of another bike with exactly the same discs, does anyone have any knowledge about them ,, cheers

LED bar end mounted turn signals: https://www.youtube.com/watch?v=LU5Pwem9ngs

I require replacement rotors front & rear for my 1985 Max. The are at the minimum thickness spec. Can anybody recommend a good quality replacement rotor as there seems to be few different styles & grades of rotors available. I don't use the bike too hard but want good stopping power.

Hey guys, Spring is upon us here in Canada and I had my bike outside for most of the winter (but it was winterized and covered). The problem is the rear tire/disc ended up not being completely covered and there is now light rust covering the rear disc. Should I take some steel wool and...

Hello guy i was on taking the cush drive and brake disc off my resent divvy wheel and all the bolts have snapped except one any ideas on how to get them out ?

I saw this at my local independent shop and thought it was quite novel. Bet you would have a tough time getting these onto a commercial flight, especially that yellow-fellow!:biglaugh:

Should i use disc brake quiet on dbl h pad's.

I had recently been looking at a disc lock for my vmax. My co-worker was telling me " oh you don't need one of those!" It wasn't so much of the theft I was concerned about. Don't get me wrong the theft is an issue. Just not as much as an issue of my 18 yr old son hopping on it while I am gone...

Having got my Max in August I had been waiting for parts to arrive before I could sort front end braking. Sean the man Morely sent me some adaptors for the six pot conversion and a rear adaptor to fit stock caliper with the larger Wavey disc. My old girl is a 91 model and was in serious need of...

Just that... If it's what i think it is, i took out my baffles today and took out 2 rings behind the caps that hold the baffles in, is this what people mean when they say they have 6-8-12 discs ect, why have so many! And what's closed ends....

My brother just picked up an 85 that has a manufacture date of 1/85,the rear disc looks different than the reaar disc on my friends 85 that has a date of 2/85..my brothers disc has the pad surface basically floating and captured by a small plate on each side and the plates are held by rivets.the...

These was my numbers last night was 103.64 hp 69.80 tq they couldn't put the sniffer on with the disc but my plugs are white so I'm sure I'm lean a/f turned out 2 3/4 numbers seem low it was 98 f

hi would like to know if a 1985 vmax front wheel bolt circle for the discs is the same as that of a 2004 vmax front wheel can i swap:ummm: discs

My rear brake disc on my 1985 is warped and needs replacing. I think this is correct.... direct replacement for: VMAX Rear 85-07 VMAX front 85-92 I also saw an aftermarket disc that lists direct compatibility with: XV125 S Virago Front 97-00 XVS125 DragStar Front 00-04 SRV250 Front 92-97...

does anyone have one of the alarmed disc locks?xena seems to be pretty common on the web.if so which model fits well on our bikes.going to be taking a trip this summer and would like a little bit of security on it while out in the parking lot at night.thanks

Here's a question you don't hear every day. With the stock Max being notoriously short on stopping power, you might think I'm daft but I'm considering dropping to a single rotor when I upgrade my rims because, well, if you spend 2K+ on rims, you'd like to SEE them. Has anyone run a single up...

Hey what size rortors do we have on our max's. I am about to get a disk lock and need the size. Also about to order a dowco weather all and it says to get a medium but I am thinking a large size. Anyone have experience? Thanks,

I am stumped with the rear disk brake on my 03 G35, hoping someone here might be able to help. The rear brake makes a clicking noise when the brake is applied. If I brake hard enough, it stops. I took the brake apart, pads are fine, caliper appears to be fine, and nothing seems out of the...

Hey whats up? I'm doing a clutch job on my max, i've noticed some slipping since i did a 4-2-1 kerker & stage 7 kit last summer ,i guess the extra hp was enough to finish the clutch .I'm going to do a double DD while i'm in there. My question is,how many friction discs (26H-16307-01)do i need...

Been messing in solidworks and drew up a new rear disc. If I'm happy I'll send it to a friend with a laser cutter in a DXF. file and he said he would do it for nothing:eusa_dance: Any thoughts to the design?