wire

As is want to do, I got my bike mostly buttoned up and then decided I wasn't quit done. I want to run a clean handle bar with bar end signals. This I've done before and posed no serious problems but on my casting to and frow I stumbled on to the Motogadget website. Man that's some trick...

Hi All, I have a 88 Vmax, i have a very strange problem with the brake light wire. It had got layed down previously and upon putting the bike back together from mostly minor damage I got new LED dual running and Brake lights. But when i hook them up which i have done on a few other bike with...

I had the seat off the Max for a re-cover the other day and I noticed a lead from the battery ground terminal. It's about a foot long and has a protective cap on the end. My first thought was it might be perhaps a flying lead for a battery tender but there is no corresponding cable from the...

My 30 amp main fuse wire gets pretty hot and I was wondering if I may have a bad connection.

Watching this. Pretty dang cool I think. I just noticed they brought IBEW (International Brotherhood of Electrical Workers) Local 1249 & O'Connell Electric down from Syracuse New York to do the rigging and setup. Hats off to ya boys, stay cut-in...

I hope some one can help me. I have an 85. Recently my battery stopped charging. I am only getting 11.9 V at 2500 RPM. I have a spare Stator and Regulator which I am in the process of installing. How ever when I went to remove the regulator I noticed that there was no wire connector, the wires...

hi again, I just disassembled my carbs from my bike to clean them and i noticed that I didn't need to do anything to unhook my Vboost. Is this normal? I tought that it would be wires to the electrical component or something:ummm: When i start the bike i do hear the two distinct whirring...

Hey guys my wiring diagram doesnt say what coils are what. I am curious if somebody can tell me which wire colors go to which cylinder so I can avoid the trial and error process?

Looking for some COP's with connectors and wire.

I am looking for the rubber gasket/ washer for the coil end of the ignition wire. This tightens up the high tension wire to the coil, mine is worn out

Hi there, I have a (mayby simple) question. I noticed lately that the front turn signals do have an other bulb (twin bulb) then the back bulb (single bulb) Also the front has an extra wire (blue) for powering the twin bulb at the front. But in my 96 bike is this wire at the front not...

Hi ther folks.... Does anybody have (or a link to) a electrical diagram with the color sheme of the VMX1200 THX

I am changing the rear tail light set up to a chock mounted style, the issue that I am having is that it is a two wire set up and I was wondering if any or you know how to properly connect this. And I plan on taking the whole rear tail off but that is just my preference. here is a link to the...

Howdy guys, I've got a (hopefully) simple question for you all. Can anyone identify these wires/plugs? http://imgur.com/a/MRBWf I was having some battery issues yesterday and ended up having to replace the battery as it was completely dead and wouldn't take a charge. Ended up getting stranded...

My speedo has a white wire with a green stripe That im told i can use for a signal to switch from launch mode to shift mode. Sitting still the bike will be in launch mode and when the bike is rolling the speedo has a sensor that will send a signal down the wire to the turn signal relay. This is...

Im gitting ready to order python's turn signal's for the gen1 and before i do to know if anyone know's of a three wire turn signal that is chrome. I would like to have LED but dont know if i want to try and do the wiring and i want running lights

Ok, newbie question here. Background first: I removed the battery on the VMX I bought a month ago to get a good look at it and charge it. In the process I "loosened" the one of the plug wires as it goes into the coil - passenger side - ha ha! I am getting random backfiring and a discolored...

I have just worked out my '85 has had a different R/R fitted to it. Specifically, an RZ350 one! It has an extra wire - a brown one. From what I can tell it's to sense voltage. Can it just be connected to the red wire? Stupid bodgey wiring... :bang head:

I guess this is just a quick review of Techflex F6. I had a bit of rat nest under my seat and cowl so I took a day and cleaned it up by re-routing wires and cutting them to the appropriate lengths, etc. Anyway, here is the product I used: And here is the website...

Sorry for all the post lately but i am hoping to get the max mostly back together this 3 day weekend. I am putting the harness back in and i am not sure how the harness gets to the rear of the bike. does it come up under the fuel pump or around the coolant reservoir? I should have taken a couple...