Quantcast

41

Yamaha Star V-Max VMAX Motorcycle Discussion Forum

Help Support VMAX Forum:

  1. C

    Looking for a 4-1 pipe

    Im building up a 3000 mile 2000 max and the jardines on it sound wimpy. Preferably would like a ufo, kerker(with a decent baffle),or voodoo 4-1, open to other suggestions as well. I have about 500 to spend and dont mind small imperfections; it'll be fixed and painted anyways.
  2. rick67ca

    Any tips on removing a Walker 4-1 exhaust?

    Hello, I am going to remove a Walker 4-1 exhaust system from my 97 VMax. I notice that the pipes are slip fit. Does anybody have any tips on how to best get everything separated without destroying it? Thanks in advance. Rick
  3. adambweird

    4-2 to 4-1

    Anyone know if its possible to take a ufo street pro 4-2 and use dragstar 4-1 mid pipes to convert to a 4-1 setup? Curious about making a switch if its possible and hanging a cf yoshi rs-3 on the end.
  4. OKCVmax

    Kerker 4-1 $475

    I'd honestly look at getting this if I didn't already have A marks pipe ordered. Looks like a good deal. https://kansascity.craigslist.org/mpo/d/gen-1-vmax-full-kerker-4-1/6240579272.html
  5. speedcostsmoney

    39 mm fcr carbs or 41 mm

    how come when people put on some FCR CARBS they run the vmax without the vboost
  6. B

    Just got my UFO 4-1, I have a few questions.

    I just received my UFO Dragstar and Stage 7 kit. I ordered the slash cut and received both the slash cut and megaphone. I'm going to install/ tune it with the slash cut first because I prefer the looks. I have a couple questions: 1) If I install the megaphone later to maybe quiet it up a...
  7. D

    Voodoo 4-1 vs...

    Anyone have any experience with the Voodoo 4-1 exhaust kit? If so, how does it compare with other exhausts like Hindle, Cobra, UFO, ...etc.
  8. pjmac5

    VooDoo 4-1 Supertraap & Open Pipe Video

    VooDoo 4-1 Supertrapp & Open Pipe Video I have attached a video with the Megaphone to Supertrapp conversion as well as an open pipe video. The Supertrapp has what sounded like a rattle in the core under heavy acceleration. I have packed the core really tight and really loose. I have run with...
  9. pjmac5

    VooDoo 4-1 Exhaust is Available

    VooDoo 4-1 for Gen 1 are in stock and available (Same day Shipping): Pipes (Raw Stainless Steel) Muffler (Polished Megaphone) Center stand must be removed but brackets can stay. Center stand can be installed for maintenance without removing pipes. Didn't say they were same as UFO but said...
  10. V

    Kerker 4-1 help?

    I RECENTLY INSTALLED A KERKER 4-1 ON MY 2005 VMAX WITH A STAGE 1 JET KIT. IT SPUTTERS/MISFIRES THRU THE MIDRANGE ONLY. MY MECHANIC TALKED TO DYNOJET AND THEY SAID MY SETUP OF 1.5 INCH BAFFLES AND A STAGE 1 JET KIT WOULDN'T WORK, BUT IT WOULD WORK GREAT WITH 2 INCH BAFFLES. DOES ANYONE HAVE ANY...
  11. S

    Another mystery 4-1 question

    Getting this of a mate....any ideas anyone ?
  12. R

    Another Kerker 4-1 too loud thread

    Hi Guys, first post here. Actually, first post in a motorcycle forum. Anyway, I bought a 2006 with 1600 miles on the clock about 2.5 months ago and although I think the bike is terrific, I don't think my neighbors do. The bike has a Kerker 4-1 exhaust with stage 7 jetting. Obviously I love the...
  13. you2low

    4-1 Kerker and jets

    Ok guys what jet kit should i use with a 4-1 kerker with 2 and 1/2 baffle .. My old bike had Stage 7 but alot has changed over the years.. Also just had the tubes and no vboost .. Should I go back that way again.. Juist got the Bike this past weekend and i know its running lean ..pipes are...
  14. tothemax93

    Marks 4-1 Oh Yea

    First ride today with my 4-1 installed. Definately the sound of power. after hearing and feeling the difference between stock and this, It's like the bike can breathe for the first time. Very impressive. The only thing I'm going to have to do is bring the decibles down a notch. I have a 14 inch...
  15. T

    Different slip-on for Hindle 4-1

    What options do I have available? I have an 86 with a Hindle 4-1 with a plain looking aluminum(maybe ti??) can. I will be keeping the 4-1 full system but would like a better looking can. It looks like the first place to separate is at the collector. ?? This is not my bike but the system is...
  16. Boostmax

    Shark 4-1 Exhaust

    Looks niiiice!!! I like the equal length headers. Must look sweet on the bike. Probably has that deep thumpy sound too with that big ol can. http://www.ebay.com/itm/Yamaha-Vmax-V-Max-1200-Aftermarket-Stainless-Shark-4-1-Exhaust-System-/200721876217?pt=UK_Motorcycle_Parts&hash=item2ebbf4c4f9
  17. Ramalama

    Kerker 4-1 - Just Curious

    I'm just curious, but will it hurt anything to run a Kerker 4-1 without a muffler on it? I'm not sure what brand of can I have because it was on the bike when I got it but there isn't much too it. It's just straight through with a 2.5" exit. Oh and if anyone knows what kind of can that is I'm...
  18. VMAX1260

    Ordered my 4-1 Marks Headers

    Send an email to marks and as we know he is not an email guy, so i found his number on this forum and called him. Ordered my 4-1 SS headers, i will use a titanium muffler with 2.5 inch inlet-outlet. I am pretty anxious to finish my Vmax and take it out to the streets again...
  19. midmoraider

    Hindle 4-1 value?

    Hey all, I am thinking about getting a Mark's 4-2 exhaust. I currently have a hindle 4-1 titanium can exhaust that the po put on. It's about 4-5 years old and in good shape, although the pipes could stand to be polished. What is the hindle worth? Thanks. You can see the exhaust in my album.
  20. Ebein_486

    Kerker 4-1 problem?

    I tightened the bolts on the exhaust, a few of them where little better than finger tight. I couldnt get at the to inner rear bolts to check them :bang head: what kinda special allen wrenches do you need to get at those? Ive got regular L and socketed Allens and cant get either seated...
Top