I pulled out my ignitor 86 vmax because my rear 2 cyclinders were not firing. The exterior terminals were corroded on one connector. I popped it open and desoldered the terminals to remove he board. The pics show what I found. Diodes 8,9,10,11,12,and 13 were toast :angry flame: . Diode 1 looks like it is almost done. Does anyone know what the rating/type is for these diodes. The other diodes on the board look smaller and different(simular to the zener diodes). These leads on these are larger than the others but the same as diode 1. They look just like the ones we used to always blow on the Army BFV circuit boards. Small gray globes with a blue stripe. If anyone can shed any light on this I would appreciate it. I have an elctronics store for supplies but am unsure how these are rated. If I use the wrong type/rating what can I damage besides this box which is already gone?
Any suggestions or pros and cons on the dyna3000?
Thanks,
Tom
Any suggestions or pros and cons on the dyna3000?
Thanks,
Tom
Attachments
-
2005_12_18 001 copy.jpg79.8 KB · Views: 54
-
2005_12_18 004.jpg79.8 KB · Views: 45
-
2005_12_18 005.jpg96.7 KB · Views: 38
-
2005_12_18 006.jpg67.3 KB · Views: 34
-
2005_12_18 009.jpg68.4 KB · Views: 35
-
2005_12_18 010.jpg40.5 KB · Views: 29
-
2005_12_18 014.jpg75.5 KB · Views: 27
-
2005_12_18 015.jpg59 KB · Views: 28