Its been a while...

[[email protected]]

Sorry to hear about your accident Prez. What happened? Did you fall off the roof?

Glad to hear you getting back to work and getting paid well to boot. Congrats.

 

[satariel666]

What a great guy, give us all a personal responce. when you come to the states if your on the east coast, we will need to get together for some wisnovka(spelling) and Beers!

LOL man where did you get that? :biglaugh:

Theres another polish special alcohol - a vodka called ZUBROWKA(bison grass).
This we can try someday :th_drink:

You have been missed very much Brother...
Still Lovin the Radiator Covers a lot...

Dave

And I have covers ver. 2 :eusa_dance:

I remeber you took 2 sets, right?
Did you sell it?

Indeed I am here now and loving it, and I have a 2000 Max with 24k miles on the clock that has become a '99 with 0km on the clock since importing here lol.. and it only took 11 months to arrive (!) Check it out in my albums..

Couple of corrections for you - it's your wrist that you broke and Switzerland that you work in

And man, crazy to hear you hurt yourself like that, hope you're ok now and will recover fully and quickly enough!

Las time we had a visitor in our workshop - guy from ANCA, from AU.
Very funny guy - aussies are great(mostly).

Nice bike you got there - lotsa mods are comming up, ey?
But still...how you can ride on the wrong side of the road? :rofl_200:

Corrections - Ditto...I hope.

I hurt myself becouse Im reckless. Theres always a first time you need to climb and install a security bolt in the wall. Mostly you are not secured for the first time.
Standing on the ladder seems safe...somethimes its not safe.
All the story :bang head:

Sorry to hear about your accident Prez. What happened? Did you fall off the roof?
Glad to hear you getting back to work and getting paid well to boot. Congrats.

My roof is at 10m(the top). I fall from lower section(6m) while repeairing the rain halfpipes. The rest of the story above. Its good that I like grass around the house - I had a soft landing.

Welcome back. Hope all went well while you were gone. unk:

:cheers:

Welcome back !

:cheers:

 

[Diablotin]

there you are Prez

 

[naughtyG]

Las time we had a visitor in our workshop - guy from ANCA, from AU.
Very funny guy - aussies are great(mostly).

Nice bike you got there - lotsa mods are comming up, ey?
But still...how you can ride on the wrong side of the road? :rofl_200:

Corrections - Ditto...I hope.

Yea most Aussie are ok - defo better here than abroad! Must be 'cos I'm french..

Love my bike indeed, not many mods coming, I'm too busy riding it! Altho this saturday the Prog springs (thanks Kevman!) are going in

And that fall of yours, man.. all I can say is OUCH!! :stretche:

 

[Bill Seward]

Welcome back! Glad to hear you're OK after the accident. You're a valuable member of this crew, and were missed when you were not here.

 

[Lew L]

Hey there,
Now that all the pleasentries are said------ on to the important stuff-----

What kind of Lathe and GTAW machine did you get??????

Lew

 

[SpecOps13]

Sell ??? No, one set on Strafer and one set on SkullDuggery.
I bead blasted one set and left one set bright Stainless..:clapping:

See my albums.... Way Cool....

 

[satariel666]

Sell ??? No, one set on Strafer and one set on SkullDuggery.
I bead blasted one set and left one set bright Stainless..:clapping:

See my albums.... Way Cool....

Hey Specsy I just got your email - shame on you :icon_rolleyes:
PS. Do you have some more? :biglaugh:

I remember somone sold his set. If ots not you then Captain perhaps?

 

[satariel666]

there you are Prez

You are one of those I have never left Mika!

Welcome back! Glad to hear you're OK after the accident. You're a valuable member of this crew, and were missed when you were not here.

Thanks!

Hey there,
Now that all the pleasentries are said------ on to the important stuff-----

What kind of Lathe and GTAW machine did you get??????

Lew

I bought(at least seller told me he would keep it for me)
a MILLER SYNCROWAVE 300 for a bargain deal. Old but good condition,
indestructable 300kg m.f. which I always wanted. I have a lot of space
so size is not mine concern. 375A of current on 60% cycle sounds terryifing for some
but if you want to deal with aluminium I dare to say its just enough.
All electronic inverters can go home.

For now I bought used manual 500mmx15000mm lathe with standard functions
cuz lathe is most important. I decieded to not buying manual mill and save some more coin for CNC mill. Im aiming for small size HAAS as funds will allow.

If I remember correctly you have some machining background, right?
Thats why you asking :biglaugh:

 

[Lew L]

Ya Prez== I do have a bit of a machining backround but it's stuck in High school. 4 lathes and 2 mills, lots of tooling and plenty of kids that dont know how to treat them.

good luck with you new toys.
Lew

 

[satariel666]

Ya Prez== I do have a bit of a machining backround but it's stuck in High school. 4 lathes and 2 mills, lots of tooling and plenty of kids that dont know how to treat them. good luck with you new toys. Lew

Aaaa you were a teacher? I use to fight and hate teachers but that was
when I was very young - now Im little bit older :rofl_200:
Still a kid but the older one :biglaugh:

Cheers!

 

[SpecOps13]

Hey Specsy I just got your email - shame on you :icon_rolleyes:
PS. Do you have some more? :biglaugh:

I'll send them when I do Brother....:rofl_200: