Replacement Fork Tubes

[Redbone]

If any one needs to replace a bad fork tube or tubes take a look here:
VMOA Members: http://www.vmoa.net/xoops/modules/catads/adsitem.php?ads_id=1577

Or here is the info from the ad:
NEW fork tubes available for 85-92(41mm), & now also 93up(43mm),
in lengths from 1" under to 6 ' over.
NO NEED to throw that bent front end away, or pay high prices from Yamaha for fork tubes!!!
Lengthen or shorten your VMAX front end for a personalized look!

Prices start at $275. set

John @ RMS Sportmax
Phone 1-610-509-VMAX(8629)

 

[zippo6]

Do you know anything about this guy?

 

[SpecOps13]

John Furbur-RMSportMax????????

Is this ad from John????

 

[dannymax]

Do you know anything about this guy?

This is Jon Furber from RMS Sportmax...I've dealt with him many times, he's a good dude.

 

[one2dmax]

I would suspect that the fork tubes are made by "Franks Forks"

Sean

 

[dannymax]

If any one needs to replace a bad fork tube or tubes take a look here:
VMOA Members: http://www.vmoa.net/xoops/modules/catads/adsitem.php?ads_id=1577

Or here is the info from the ad:
NEW fork tubes available for 85-92(41mm), & now also 93up(43mm),
in lengths from 1" under to 6 ' over.
NO NEED to throw that bent front end away, or pay high prices from Yamaha for fork tubes!!!
Lengthen or shorten your VMAX front end for a personalized look!

Prices start at $275. set

John @ RMS Sportmax
Phone 1-610-509-VMAX(8629)

I'm a little concerned about the 6' over tube....I'm an old chopper guy, and love extended front ends but.........:surprise: :rofl_200:

 

[Thevmaxrider]

ROFLMAO!!! Saw that too Dan-o and was wondering how far you would have to rake the steering head to accomodate those bad boys:confused2: Or you could ride with a view of the clouds, just don't turn:rofl_200:

 

[one2dmax]

Easy rider lol!

Here's Franks contact page.
http://www.frankmain.qpg.com/

Never bothered to setup with them as a vendor and not sure if they even have vendor discounts (so we can resell). They weren't making the bigger tubes a few years ago but were going to start making them. Sounds like they just may have started up with it.

Sean

 

[PATMAX]

Frank's Forks 41mm stock length $269
43 mm $360 per pair add freight too.
Sean, he (Frank?) asked me if it was for business or individual so I'd say yes he has a Jobber's price for you. Prices are as of 1320 hours today.

 

[one2dmax]

Cool! I'll have to send him some info.