Rand-5107
Well-Known Member
Ok here's how I finally got my new boot on, after destroying my new paint job again .Put the boot on your swing arm. Drain hole down. Put retaining spring around the front where it (rubber boot) goes over the middle gear carrier. Line up the joint of the spring half way between the top and bottom to the outside of the bike. Lube up the boot and groove and front of carrier with armor all or tire soap. Install swing arm and pins (adjuster bolts). While pulling on ear of boot, push the bead into groove. Work your way around it. I had to push fairly hard, but with the lube it popped right in. Okay back to touchup paint. Good luck Rand.