dyno

Looks like they finally made a Harley-specific dyno... http://www.youtube.com/watch?v=WePlHPNaM5w

Her are my dyno results from Aj's racing i hope the pics are here:th_image003:

Went to AJ's yesterday and dyno tuned my motor it pulled 166rwhp and 111.25 torque. I was very impressed with the #s . Marks 4 2 1 system gained 13hp compared to my HMF 4 into 2 ,:punk:Thanks Mark!!! I will try and post the dyno results here.

Daytona 2011 Brute Horse Power Shoot Out, in 1st place as of today. 198hp Max power, 1501 and over class. Will try for over 200 tomorrow. Wish me luck............. http://www.youtube.com/watch?v=3cBtwgYW6h0&feature=player_detailpage

anyone have any exhaust dyno sheets? it would be nice to know what HP gains the different exhausts give you more so than just sounds...

Finally got my Max Dyno'd by someone who knows what he is doing. I used Bucks Down Racing in Oldsmar Florida. 2010 Akrapovic Midpipe, Stock Cans, PVC, DD MOD, Airbox Mod with Accel Foam Filter. 177.55 HP to the ground 114.98 Torque to the ground Running a tad rich but running good so say...

I couldn't decide where to put this so I chose a General Forum. It involves my clutch, a dyno run and the mystery of about 20 missing Horse Power... It warmed up a little here in Not so Sunny Florida. I took Mary and we went for a short ride tonight. About 10 minutes into it, I jumped on the...

Here's my dyno sheet & video clip (thanks Brett) from Captain Kyles dyno party this past Saturday. A lot of smoke on decel - valve seals perhaps? Sean Morley has already given me some tuning advise. Any thoughts are welcome... http://www.youtube.com/watch?v=sQrb--vZWz0

I posted my dyno in the dyno lab section . Any suggestions??

Engine 1300cc high compresion je piston.carrilo rods. Stage one heads. Fcr 's 39 pcw setup. I made 2 dyno runs. In a 20 years expierence drag racer which has a dyno. He uses an instrument called innovator for measuring the air fuel ratio. (sean morley i hope you know the instrument because i...

tommorow i will run a duno. i recently installed my fcr's which work great. i was trying to find some dyno's numbers to see what will i exepect with my 1300cc engine but no luck. does anybody run a dyno with 1260 -1300-1325 engine and fcr's carbs ? ?

I was browsing around on ebay and pulled up a part from Pinwall and see that they had dyno'd the bike before dissassembly. http://www.pinwallcycle.com/ebay/bike2399/bike2399dss.jpg 90HP/ 159 ft lbs Wonder what kind of mods the PO did to pull those #'s :biglaugh:

I posted this on the other site as well i can rent a NON-portable dyno for the weekend of thunder for $500 all day or 3 passes for $45.00 which is still a great deal. The dyno is at Ajs racing in tyrone pa about an hr from j-town. Lets have a shootout!!! :th_biggun:

Hey all I have been talking to a friend with a mobile Dyno & wanted to see how many would be interested in a Tech day with a Dyno standard Dyno charges would apply ( Its not my Dyno) I would need a good response to get this set up or else it would cost me. Also this would be a lot of work to...

Put the bike on the dyno at Cassoday at the start of the month. made 123hp and 80ft/lbs. and 127decibles. I was definetly happy and a little surprised with the results! What do I have to do to push it to 150hp?

This is a stock 09 with the exception of a K&N air filter. Due to the speed limitation (135 mph) from the stock ECU, we couldn't proceed in 5th gear.

Anybody ever do a dyno without vboost and with vboost? Just curious how much power it might add. My vboost control box is not working so right now the butterflies are completely closed. I took it out and rode it for about 25 miles like that and it ran pretty good but had a bit less power. I'm...

i live between tampa and orlando does anyone know a place the i can take my 2004 vmax to have it dyno and tuned i cant seem to find no one that works on this bike thats know about it

Finally finished my " Mad Max" project. Factory exhaust modified with 3/4"holes smoothed out with Unibit to nearly 13/16" Stock box with K/N. Before tune 105hp/79.39tq. after 115.10hp/79.47tq. The A/F screws 2.5 turns. Stage 1 needles,springs, shims, Air Jet DJ 150 and the main 147.5. Sync -...

1999 Vmax - Dyno Results ..First time I dyno'd my machine.. Only 1 run. SPECS: >99 vmax stock internals & carbs >Aftermarket Nology Wires >Valvoline motorcycle oil >Supertrapp Slip ons >stock airbox >carbs synch'd pretty well, about 3mos ago. >..about 15k on motor 1. Well, when the guy hooked...