If you have read my other threads you would see that I just put on Hayabusa calipers, R1 rotors, and used Sean Morley's adapters. I had some trouble with a little grinding going on. Turns out one of the rotors is a little oblonged. It was grinding out the inside of the caliper. Now that I increased the clearance I have no more grinding.
Back on topic. Now when I go down the road the bike shifts from side to side. For a mental picture of this take your hand like you are going to shake someone's hand. Now turn your hand and wrist left and right slightly. If I actually let go of the bars while I'm slowing down at about 15 mph it's actually pretty bad. Seems like it smooths out the faster I go. But you still notice it. I'm stumped.
Ideas?
Back on topic. Now when I go down the road the bike shifts from side to side. For a mental picture of this take your hand like you are going to shake someone's hand. Now turn your hand and wrist left and right slightly. If I actually let go of the bars while I'm slowing down at about 15 mph it's actually pretty bad. Seems like it smooths out the faster I go. But you still notice it. I'm stumped.
Ideas?