Re: delkevic exhaust
well I put them on , Wednesday night , the fit wasn't great ! , the holes where the cans mount into the stock mounting holes near the rear foot pegs are slotted more or less , up & down , but they need to be slotted more from left to right , the pipes on the slip-ons where they go onto the stock pipes have 4 slits in each about an inch long , ( should only be a 1/2 inch long ) but the stock pipe is only about 1 & 1/16 long where they go " into" the slip-ons , so the stock pipes must go all the way in , or exhaust leaks out of the slits , obviously ! ... But the muffler has to come forward at least 1/4 inch to accomplish this , so i had to drill out the mounting holes & slide the slip-ons forward ! ... They look good , they are louder then stock but a lot quieter then the guys at the brownie run last year ! ... I'm sick & have a fever and still rode today 110.8 miles to check them out , nothing gained , but nothing lost performance wise ! ... Bike runs the same , they look much better then stock & are a lot lighter ! ... So I'm happy with them now , but at 11:00 pm on Wednesday night , you could have baked an egg on my frigging head ! ... I called delkevic and their 2 tech guys are supposed to call me from the "UK" next Saturday ! ... We will see !